60
B's Recorder/B's CLiP
z
When ejecting the disc while
is displayed on the taskbar
• Select
with the right button and select [Eject].
Do not eject discs in any other way except the one described above.
• If you cannot eject the disc even after attempting the operation described above, shut
down Windows and after the power is off, insert a pointed object (e.g., the bent-out tip of
a paper clip, or the tip of a ballpoint pen) into the emergency hole (A) and then move in
the direction of the arrow.
z
Do not use the Fast User Switching function.
If this function is used,
or
will no longer be shown on the taskbar after the switching
is complete. If this happens, return to the original user without using the Fast User
Switching function, and then log on with the user you want to use.
z
Do not add the check mark for [Enable CD recording on this drive] in [Properties] -
[Recording] of the DVD-ROM & CD-R/RW drive.
z
Be sure to shut down B's Recorder before logging off Windows.
<Only for CF-Y2 series>
z
While B's Recorder is running or
is displayed on the taskbar, the DVD-ROM & CD-R/
RW drive power can not be turned off.
z
When the drive power is off,
is displayed on the taskbar.
NOTE
z
When B's Recorder finishes writing, the disc cover opens automatically. You can
change the settings for B's Recorder so that the disc cover does not open automati-
cally. If you select [OK] after writing, however, the disc cover will open regardless of
the settings.
z
If a hand is on the disc cover, and the disc cover is prevented from opening, the drive
will not be accessed correctly. In this case, restart the computer.
z
If you uninstall the software accidentally, also re-install it following the steps below.
A
Set the Product Recovery DVD-ROM in the DVD-ROM & CD-R/RW drive.
B
Select [start] - [Run] and input [d:\bha\setup.exe]
, then select [OK].
Follow the on-screen instructions.
• When the message that requires the serial number appears during the installation,
input the serial number written on the Operating Instructions.
• When the installation is completed, although it is displayed that the computer should
be restarted after removing the disc, be sure to restart it without removing the
Product Recovery DVD-ROM.
