7
Security Measures
To prevent unauthorized access of your computer, the various security measures are provided below.
When you do not want your computer to be used without permission
*
If you are starting from the suspend mode, if after three attempts the
correct password is not input, or if no password is entered for about
a minute, the computer returns to the suspend mode.
Over three incorrect attempts,
If the correct password is input,
Will Not Start
*
(Power off)
Situation
Function to use
Reference
User Password
below
Coffee break Password
page 10
Prevent operation by using a floppy disk
page 11
Use a security lock
You do not want your computer to be used without permission
Same as above, but while you’re away temporarily
You want to prevent theft or damage to data by using a floppy disk
You want to prevent theft of your computer
You should set your "Supervisor Password" and "User Password" (The User Password can only
be set when the Supervisor Password has been set).
Without the password, access to your computer is impossible.
Starting up when the password is set
Upon entering your Supervisor
Password or User Password and
pressing
Enter
.
Will Start
If entering the Setup Utility with Supervisor Password
You can not register [Advanced] menu and some items in [Security] menu.
F9
does not work.
When [User Password Protection] has been set to [Protected], you can not register the User
Password.
You can register all items of the Setup Utility (
page 26).
If entering the Setup Utility with User Password
