8
4
3
2
1
Security Measures
NOTE
CAUTION
Setting the Supervisor Password
(enabling, changing, disabling)
Your password will not be displayed on the screen.
Please limit your password to seven characters. Note that there is no distinction
between upper and lower case letters.
White colored keys can be used. Note that the space bar and function keys cannot be
used.
Do not input your password while holding down on
Shift
or
Ctrl
.
Use only the upper horizontal row of numeric keys to input your password.
Do not forget your password. If a password is forgotten you will be unable to use
your computer. Please contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a short time.
Run the Setup Utility
(
page 26)
Using and , select [Security]
Using and , select [Set Supervisor Password], then
press
Enter
Enter your password at the [Enter New Password], then
press
Enter
<Only when the Supervisor Password has been set>
Enter your password at the [Enter Current Password], then
press
Enter
5
To disable the Supervisor Password
Press only
Enter
When you do not want the User Password enabled, changed, or disabled without
permission,
using and , select [User Password Protection] and press
Enter
using
and , select [Protected] and press
Enter
.
At the [Setup Notice], press
Enter
6
Re-enter your password at the [Confirm New Password] , then
press
Enter
7
Press
F10
, then select [Yes]
To disable the Supervisor Password
Press only
Enter
8
When the User Password is set, the Supervisor Password will be needed.
NOTE
