![background image](http://html.mh-extra.com/html/panasonic/cf-45-series/cf-45-series_reference-manual_264284004.webp)
4
CAUTION
1
Run the Setup Utility
(
page 26)
Suspend Mode
or
Hibernation Mode
2
3
4
Setting the Suspend or Hibernation Function
If you want to immediately start up and continue an application after shutting down your com-
puter, you can do so by using the suspend or hibernation function.
Starting Up Your Computer Quickly
Power off your computer
Function
Suspend function
Hibernation function
Where data is saved to
Memory
Hard disk
Speed
Fast
Somewhat slow
Requires power supply
Yes
(if power is cut, all data is lost)
Power not required to maintain data
Shutting Down Using the Suspend or Hibernation Function
Suspend/Hibernation Functions
Differences between the suspend function and hibernation function
The computer should be set for suspend or hibernation (
see the above procedure).
At the "beep*" sound, release your finger from the power switch. If you continue to
slide on the switch and hold it for more than four seconds, the "beep*" sound will
come out again and the power will go off. Data not previously saved will be lost.
If the computer will not be operated for an extended period of time, it is recom-
mended that hibernation mode is used instead of suspend mode.
Using and , select [Power]
Using and , select [Power Switch] and press
Enter
Press
F10
, then select [Yes]
Using and , select [Suspend] or [Hibernation] and
press
Enter
5
Do not touch the power switch while the com-
puter is entering the suspend or hibernation
mode.)
* When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the Setup Utility
(
page 27) or by the key combination
Fn
+ F4
, there will be no beep sound.