2
Hold down the
Fn
key and press
F2
to change the brightness.
(When the brightness is at its maximum value,
is displayed.)
By pressing this key combination when the external display is connected you
can select either an external display, LCD or simultaneous. Powering the com-
puter off and then back on enables the display setting of the Setup Utility.
Pressing this key combination toggles the internal speaker (headphone jack)
on and off.
Powering the computer off and then back on enables the speaker setting of the
Setup Utility.
Pressing this key combination adjusts the volume of the internal speaker and
headphone jack.
This key combination cannot be used to adjust the volume of the warning
beep.
This key combination may not work depending on the power saving func-
tion in the sound chip. (
page 34)
Pressing this key combination causes the current screen on the display to be
saved to memory, and powers off the computer. When the computer is pow-
ered on again, this same screen will be displayed. (The computer must be
plugged into the AC adapter or have a battery pack with sufficient remaining
power installed.)
Pressing this key combination temporarily disables the power management
feature of the Setup Utility. (
page26) Pressing it again, or powering the
computer off and then back on enables the power management feature of the
Setup Utility.
Pressing this key combination displays the remaining battery capacity on the
screen.
Pressing this key combination cuts off power to the LCD display until opera-
tion is resumed by pressing any key or the trackball (mouse).
Key Combinations
CAUTION
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the trackball (mouse) or other keys.
LCD brightness control
Display change
Speaker on/off switch
Volume control ( down)
Volume control ( up)
Power off using the sus-
pend function
Power Management
enable/disable switch
Remaining capacity of the
battery pack
ECO mode
for conserving power
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Fn + F6
Fn + F7
*
Fn + F8
Fn + F9
Fn + F10
*
CAUTION
When disabling the speakers with this key combination, the warning beep
is also disabled.
* When [Disable] is set for [Fn+F7/Fn+F10] with the Setup Utility, these key combinations become inoperable.
ON
OFF
Down
Up
Enable
Disable
NOTE
