31
NOTE
NOTE
Exit Menu
If the Supervisor Password or User
Password has been set, the password
must be entered before Windows can
start.
Save Values & Exit
Exit Without Saving Changes
Get PnP Default Values
Get non-PnP Default Values
Load Previous Values
Save Current Values
Parameters
Save Values & Exit
Exit Without Saving Changes
Get PnP Default Values*
Get non-PnP Default Values*
Load Previous Values
Save Current Values
Exit the Setup Utility and save your changes to CMOS.
Exit the Setup Utility without saving your changes (except the password settings) to
CMOS.
Set the Plug & Play default settings for operating system.
Set the non-Plug & Play default settings for operating system.
Load previous values from CMOS for all Setup items.
Save your changes to CMOS.
*
This item may not be displayed when starting up the Setup Utility with the User Password.
Selecting [Get Non-PnP Default Values], the settings for Plug & Play operating system can not be
registered unless selecting [Get PnP Default Values]. To avoid the confusion, register the settings
after pressing F9 or selecting [Get PnP Default Values] or [Get non-PnP Default Values].
Setup Utility
