19
5mm (0.197")
5mm (0.197" )
5mm (0.197" )
PC Cards
The PCMCIA card slots accept PC cards that conform to the PC card standard.
Type III
In order to use PC cards, the appropriate PC card device drivers must be installed.
Make sure that the combined operating current of your PC cards does not exceed the maxi-
mum allowable current of the card slots. If the output current limit (3.3V, 400mA; 5V,
400mA; 12V, 120mA) is exceeded, malfunction may result.
Only the bottom slot can support a Zoomed Video (ZV) card.
NOTE
Mounting
Removal
Press the button to displace the card.
NOTE
Remove the card by pulling it out.
Type I or II
Insert your PC card and slide it in until it is firmly in place. As
you slide the card in, a button will pop out that enables you to
remove the card. (NOTE: The PC card should have an ar-
row indicating how it is to be inserted.)
Hardware Expansion
Button
Up to three Type I/II (thickness: 5 mm (0.197 inch) or less) cards can be
inserted.
Or, one Type I/II and one Type III card (1.8-inch hard disk drive, etc.) can
be inserted; the Type III card can only be inserted into the bottom slot.
If you use CardWorks software, please refer to its on-line Quick Reference Guide.
(Click [Start]-[Programs]-[Panasonic]-[CardWorks Quick Reference Guide].)
5mm (0.197" )
5mm (0.197" )
