9
Close the "Welcome to Windows 95" screen.
You can now use Windows 95, but in order to set the Panasonic origi-
nal environment and create back-up disks, select
(Panasonic Setup
icon). Windows restarts. If Windows does not restart, press the RE-
SET button.
MEMO
You can also restart your computer in the MS-DOS
mode by selecting "Restart the computer in the MS-
DOS mode?"
Shutdown
You can turn your computer off by selecting "Shut Down..." from the
"Start" menu.
Startup and Shutdown
Ready to create Firstaid FD.
Insert a floppy disk in drive A and press any key.
Please remove the diskette and write protect it.
Press any key to continue...
NOTE
Make sure to create "Firstaid FD" etc. that
will allow you to reinstall the operating sys-
tem if necessary.
Do not switch the power off or put the com-
puter into the suspend or hibernation mode
while the "Firstaid FD" etc. is being created.
Beginning with the next time you turn on the computer, this screen will
be displayed as soon as power is switched on.
To set the user password, start the Setup utility. (
P.24)
Firstaid FD
Panasonic Tools Disk
CardWorks(TM) Installation Disk
TranXit Disk 1,2
Drivers Disk
If you have the floppy disks in hand, press any key and advance t
the next step. Any data on these disks will, however, destroyed.
If the floppy disks are not currently available, turn off the pow
until they are.
*
*
*
*
*
*
*
*
*
*
*
********************************************************************
Press any key to continue...
1
1
1
2
1
10
11
Firstaid FD etc. creation
Create back-up disks of the software preinstalled in your computer.
Be sure to have 6 2HD-type floppy disks on hand. Please backup your
disks in the following order:
Firstaid FD
Panasonic Tools Disk
CardWorks™ INSTALLATION Disk
TranXit Disk (2)
DRIVERS DISK
Startup screen