Panasonic AWRP605P - MULTI FUNCTION CONTROLLER, Operating Instructions Manual

Page: 10 / 46

10
Parts and their functions
$ Control panel
CONTROL/PREVIEW MONITOR OUT SEL
AUX 1 2 3 4 5
TALLY
TRACING MEMORY
LAMP
MENU
LIMIT
OFF
LIMIT
ON
FULL EMPTY
OK
LCD
CONTRAST
CAMERA
CONTROL
START
POINT
R/B
GAIN/PED
WHITE
BAL
AWC
GAIN
MODE
CLOSE WIDE NEAR
DATA SET
TR/PSET M.LOCK
MEMORY
IRIS
IRIS
IRIS
OPEN
ZOOM
TELE
FOCUS
FAR
CALL
INCOM
LEVEL
FOCUS
OPEN
FAR
TELE
OFF
ON
OPERATE
WIDE
ZOOM/FOCUS/IRIS
ABC
ATW
A
B
NG
OK
START/STOP RESTORE RESET
DEF WIP H/F EXT ND OPTION
PAN/TILT SET CAMERA CONTROL
TRACING/PRESET MEMORY
IRIS
SPEED
PRIORITY
FOCUS
BAR
CAM
TR
PSET
LOW
HIGH
AUTO
MANU
AUTO
MANU
LOCK
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 130
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
DOWN
PA N / T I LT / F O C U S / I R I S
U P
L R
CLOSE
NEAR
OPEN
FAR CLOSE
NEAR
`
^
_
a
^ TALLY lamps [1] to [5]
When tally signals are input to TALLY connectors [1]
through [5] on the main unit, the lamps with the numbers
corresponding to the connectors come on.
_ CONTROL/PREVIEW MONITOR OUT SEL buttons
[1] to [5], [AUX]
When buttons [1] to [5] are pressed, the pan-tilt head
systems connected to the slots in the main unit are
selected.
The lamps of the selected buttons come on, and the
video signals from the selected pan-tilt head systems are
output to the PREVIEW MONITOR OUT 1 to 3
connectors on the main unit.
When the [AUX] button is pressed, the signals from the
equipment connected to the AUX IN 75
Ω
connector on
the main unit are output.
` PRIORITY button
When more than one control panel is connected to the
main unit, press this button to control the pan-tilt head
systems.
The button’s lamp comes on in the control mode, and it
remains off in the non-control mode.
When one control panel is connected to the main unit, the
button’s lamp is lighted at all times.
a SPEED button
This is used to select the control (pan, tilt, zoom, focus,
iris) speed of the pan-tilt head system currently selected.
Each time it is pressed, the high-speed mode or low-
speed mode is selected in turn.
The button’s lamp comes on in the high-speed mode, and
it remains off in the low-speed mode.
Using the SPEED SELECT item on the setting menu, the
speed can be set in one of three steps for the high-speed
mode and for the low-speed mode.