4
1
OPERATE lamp
This comes on when power is supplied to the main unit
and both the DC POWER switch on the main unit and the
OPERATE switch on the control panel are set to ON.
It goes off when either switch is set to OFF.
It flashes when a disconnection or some other problem
has occurred with the cable which is used to connect the
main unit and control panel.
2
OPERATE switch
This is used to control the power supply of all the pan-tilt
head systems (each of which consists of a pan-tilt head
and convertible camera) which have been connected to
the main unit.
3
INCOM connector
The headset for inter-communications purposes is
connected here.
4
LEVEL control
This is used to adjust the volume of the headset’s
receiver.
5
CALL button
When this button is pressed, the buzzers on the other
connected control panels sound, and the CALL button’s
lamp comes on.
6
IRIS [AUTO/MAN/LOCK] button
This is used to select how to adjust the lens iris of the
pan-tilt head system currently selected.
Each time it is pressed, the AUTO, MANU or LOCK
setting is selected in turn.
AUTO : The lens iris is adjusted automatically, and the
IRIS button’s lamp comes on. If the FOCUS/IRIS
dial for adjusting the iris is rotated when AUTO
has been selected, the IRIS button’s lamp flashes
as a warning.
MANU : The lens iris is adjusted manually using the
FOCUS/IRIS dial.
At this setting, the IRIS button’s lamp goes off.
LOCK : The lens iris is fixed at the position where it was
adjusted manually, and the IRIS button’s lamp
flashes.
At the LOCK setting, the position of the lens iris
will not be changed even if the FOCUS/IRIS dial
is turned.
<Note>
Set the button to the MANU position when entering the
lens iris position in the TRACING/PRESET MEMORY
button.
7
IRIS indicator
This indicates the lens iris position of the pan-tilt head
system currently selected using 12 steps (from CLOSE to
OPEN).
8
ZOOM indicator
This indicates the lens zoom position of the pan-tilt head
system currently selected using 12 steps (from WIDE to
TELE).
9
FOCUS indicator
This indicates the lens focus position of the pan-tilt head
system currently selected using 12 steps (from NEAR to
FAR).
Parts and their functions
$
Control panel
CONTROL/PREVIEW MONITOR OUT SEL
AUX
1
2
3
4
5
TALLY
TRACING MEMORY
LAMP
MENU
LIMIT
OFF
LIMIT
ON
FULL
EMPTY
OK
LCD
CONTRAST
CAMERA
CONTROL
START
POINT
R/B
GAIN/PED
WHITE
BAL
AWC
GAIN
MODE
CLOSE
WIDE
NEAR
DATA SET
TR/PSET M.LOCK
MEMORY
IRIS
IRIS
IRIS
OPEN
ZOOM
TELE
FOCUS
FAR
CALL
INCOM
LEVEL
FOCUS
OPEN
FAR
TELE
OFF
ON
OPERATE
WIDE
ZOOM/FOCUS/IRIS
ABC
ATW
A
B
NG
OK
START/STOP
RESTORE
RESET
DEF
WIP
H/F
EXT
ND
OPTION
PAN/TILT SET
CAMERA CONTROL
TRACING/PRESET MEMORY
IRIS
SPEED
PRIORITY
FOCUS
BAR
CAM
TR
PSET
LOW
HIGH
AUTO
MANU
AUTO
MANU
LOCK
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
130
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
DOWN
PA N / T I LT / F O C U S / I R I S
U P
L
R
CLOSE
NEAR
OPEN
FAR
CLOSE
NEAR
7 8 9
5
1
2
3
4
6
<Note>
The IRIS, ZOOM and FOCUS indicator displays may not
appear depending on the model of pan-tilt head and
camera used.
Contact your local dealer for details.
Summary of Contents for AWRP605P - MULTI FUNCTION CONTROLLER
Page 45: ......
