Panasonic AWRP605P - MULTI FUNCTION CONTROLLER, Operating Instructions Manual

Page: 8 / 46

8
P START POINT button
Press this to set the position at which the tracing memory
is to be started.
Q START/STOP button
Press this to start or stop entry into the tracing memory.
R RESTORE button
Press this to correct or change what has been entered in
the tracing memory.
S RESET button
Press this to erase what has been entered in the tracing
memory.
T TR/PSET button
This is used to select the tracing memory mode or preset
memory mode.
Each time it is pressed, the tracing memory mode or
preset memory mode is selected in turn.
When the tracing memory mode is selected, the button’s
lamp comes on; when the preset memory mode is
selected, the lamp goes off.
U M.LOCK button
This is used to disable or enable the recording of settings
in the tracing memory or preset memory.
Each time it is pressed, recording disable or enable is
selected in turn.
When recording is disabled, the button’s lamp comes on;
when it is enabled, the lamp goes off.
V MEMORY button
This is pressed when the pan-tilt head system’s settings
are to be entered as a preset memory into one of the
TRACING/PRESET MEMORY buttons [1] through [50].
Up to 50 settings can be entered per pan-tilt head system
into a preset memory.
Pan-tilt head system’s settings
How to enter settings into the preset memory
W
TRACING/PRESET MEMORY buttons [1] to [50]
Tracing memory or preset memory data is entered into
these buttons.
Tracing memory: [1] through [10]
Preset memory : [1] through [50]
<Note>
It is not possible to enter preset memory data into any
button in which a tracing memory has already been
entered.
1
Select the pan-tilt head system using the
CONTROL/PREVIEW MONITOR OUT SEL button.
2
Select the preset memory mode using the
TP/PSET button.
3
Set the pan-tilt head system.
4 While pressing the MEMORY button, press one of
the TRACING/PRESET MEMORY buttons from [1]
through [50] into which the settings are to be
entered.
Pan-tilt head:
Pan-tilt position
Camera:
Zoom, focus, iris, white balance
Parts and their functions
$ Control panel
CONTROL/PREVIEW MONITOR OUT SEL
AUX 1 2 3 4 5
TALLY
TRACING MEMORY
LAMP
MENU
LIMIT
OFF
LIMIT
ON
FULL EMPTY
OK
LCD
CONTRAST
CAMERA
CONTROL
START
POINT
R/B
GAIN/PED
WHITE
BAL
AWC
GAIN
MODE
CLOSE WIDE NEAR
DATA SET
TR/PSET M.LOCK
MEMORY
IRIS
IRIS
IRIS
OPEN
ZOOM
TELE
FOCUS
FAR
CALL
INCOM
LEVEL
FOCUS
OPEN
FAR
TELE
OFF
ON
OPERATE
WIDE
ZOOM/FOCUS/IRIS
ABC
ATW
A
B
NG
OK
START/STOP RESTORE RESET
DEF WIP H/F EXT ND OPTION
PAN/TILT SET CAMERA CONTROL
TRACING/PRESET MEMORY
IRIS
SPEED
PRIORITY
FOCUS
BAR
CAM
TR
PSET
LOW
HIGH
AUTO
MANU
AUTO
MANU
LOCK
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 130
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
DOWN
PA N / T I LT / F O C U S / I R I S
U P
L R
CLOSE
NEAR
OPEN
FAR CLOSE
NEAR
P T U W V Q R S