8
INCOM connector
This connector is used for connecting to the TALLY &
INCOM connector on the AW-SW300 live switcher, etc.
to enable inter-communication.
To perform inter-communication, use the inter-
communication system plug (Mini DIN 6-pin) supplied.
9
CONTROL OUT TO PAN/TILT HEAD connectors [1] to [5]
Connect these connectors to the IP/RP connector on the
AW-PH350 pan-tilt head using a straight cable equivalent
to 10BaseT (UTP category 5). The connection distance
can be extended up to 1,000 meters.
When connecting one of these connectors to any other
pan-tilt head, use the RS-232C/RS-422 converter, and
connect the connector to the RS-232C control connector
on the pan-tilt head.
:
TALLY connectors [1] to [5]
These connectors are used for connection with the
TALLY connector of a special effects generator, video
switcher or other equipments.
When the voltage which is supplied to terminal numbers
1 through 5 is set to the GND level, the TALLY lamps on
the control panels and the TALLY lamps on the pan-tilt
heads come on.
;
G/L IN connector (automatic 75
Ω
termination)
When the pan-tilt head system cameras are to be
synchronized with external signals for use, connect a
coaxial cable to this connector, and supply a black burst
signal or VBS (video, burst and sync) signal.
When a coaxial cable is connected to the 75
Ω
AUTO
connector, the 75
Ω
termination is turned off.
<
75
Ω
AUTO connector
The black burst signal or VBS (video, burst and sync)
signal which is supplied to the G/L IN connector is output
from this connector by way of a loop-through format.
=
AUX IN 75
Ω
connector
A coaxial cable is connected to this connector to supply
the line view signals, etc. from a special effects
generator, etc.
When the CONTROL/MONITOR OUT SEL AUX button
on the control panel is pressed, the signals supplied to
the AUX IN 75
Ω
connector are output from the PREVIEW
MONITOR OUT 1, 2 and 3 connectors.
>
PREVIEW MONITOR OUT connectors 1, 2 and 3
One end of a coaxial cable is connected to one of these
connectors and the other end is connected to the video
input connector on a TV monitor.
When the CONTROL/MONITOR OUT SEL 1 to 5 buttons
on the control panel are pressed, the video signals from
the selected pan-tilt head system are output.
When the AUX button has been pressed, the signals
supplied to the AUX IN 75
Ω
connector are output.
<Note>
The signals which are output from these connectors are
used for image verification purposes. Signals
representing the actual quality of the images shot by the
camera are output from the VIDEO/Y OUT, Pr OUT and
Pb OUT connectors.
?
EXT/SERVICE connector
This connector is intended to support additional functions.
It is not supported at the present time.
Pin No.
Signal
1
R
2
RECEIVE –
3
TALK +
4
TALK –
5
———
6
———
1
2
4
3
5
6
13
Parts and their functions
$
Main unit
G/L
IN
75
Ω
AUTO
TALLY
1
2
3
4
5
5
4
CONTROL OUT
TO PAN/TILT HEAD
3
2
1
EXT/
SERVICE
AUX
IN
75
Ω
PREVIEW
MONITOR
OUT 1
PREVIEW
MONITOR
OUT 2
PREVIEW
MONITOR
OUT 3
INCOM
EXTERNAL
CONTROL
OUT
OFF ON
TERMINATION
TALK
-
RECEIVE
-
+
RECEIVE
+
TALK
CONTROL IN
TO CONTOROL PANEL
CONTROL PANEL
POWER OUT
GND
DC 12V IN
PUSH
DC POWER
OFF
ON
3
2
1
1
2
4
3
5
6
-
+
1
2
4
3
TO PAN/TILT
HEAD
VIDEO
/Y
IN
VIDEO
/Y
OUT
OPTION
CARD
Pr
OUT
Pb
OUT
Pr
IN
Pb
IN
G/L
OUT
REMOTE
?
=
<
;
9
:
>
8
Summary of Contents for AWRP605P - MULTI FUNCTION CONTROLLER
Page 45: ......
