15
E
VIDEO/Y OUT connector
The video signals adjusted by the cable compensation
circuit to match the length of the cable from the pan-tilt
head to the main unit are output from this connector.
One end of a coaxial cable is connected here and the
other end is connected to the video input connector or the
Y signal input connector on a TV monitor, special effects
generator, VTR or other equipments.
F
Pr OUT connector
When component signals are supplied to the multi-
function controller, the Pr signals adjusted by the cable
compensation circuit to match the length of the cable
from the pan-tilt head to the main unit are output from this
connector.
One end of a coaxial cable is connected here and the
other end is connected to the Pr input connector on a TV
monitor, special effects generator, VTR or other
equipments.
G
Pb OUT connector
When component signals are supplied to the multi-
function controller, the Pb signals adjusted by the cable
compensation circuit to match the length of the cable
from the pan-tilt head to the main unit are output from this
connector.
One end of a coaxial cable is connected here and the
other end is connected to the Pb input connector on a TV
monitor, special effects generator, VTR or other
equipments.
H
OPTION CARD slot
When component signals are supplied to the multi-
function controller, and an AW-PB302 RGB card, AW-
PB304 SDI card, AW-PB307 SVGA convert card or AW-
PB309 Web card (optional accessories) is installed in this
slot, signals utilizing the functions of the installed card
can be output.
For further details, refer to the operating instructions of
the card concerned.
<Notes>
O
When an optional card is to be installed in the multi-
function controller, the AW-PB302 RGB card (optional
accessory) must be installed in the convertible
camera.
O
A pan-tilt head system cannot be controlled through
network even if the AW-PB309 Web card has been
installed in the multi-function controller.
I
VIDEO CARD slots 1 to 5
Each pan-tilt head system requires one VIDEO card.
A VIDEO card is already installed in slot 1 and four other
AW-PB605 VIDEO cards (optional accessories) can be
installed to increase the number of pan-tilt head systems.
<Notes>
O
There is no need to install a VIDEO card if the multi-
function controller is employed merely to operate a
pan-tilt head system and not to process video signals.
O
When three or more AW-PB605 VIDEO cards are to
be additionally installed, connect the AJ-B75 AC
adapter (optional accessory) to the DC 12V IN socket.
Parts and their functions
$
Main unit
G/L
IN
75
Ω
AUTO
TALLY
1
2
3
4
5
5
4
CONTROL OUT
TO PAN/TILT HEAD
3
2
1
EXT/
SERVICE
AUX
IN
75
Ω
PREVIEW
MONITOR
OUT 1
PREVIEW
MONITOR
OUT 2
PREVIEW
MONITOR
OUT 3
INCOM
EXTERNAL
CONTROL
OUT
OFF ON
TERMINATION
TALK
-
RECEIVE
-
+
RECEIVE
+
TALK
CONTROL IN
TO CONTOROL PANEL
CONTROL PANEL
POWER OUT
GND
DC 12V IN
PUSH
DC POWER
OFF
ON
3
2
1
1
2
4
3
5
6
-
+
1
2
4
3
TO PAN/TILT
HEAD
VIDEO
/Y
IN
VIDEO
/Y
OUT
OPTION
CARD
Pr
OUT
Pb
OUT
Pr
IN
Pb
IN
G/L
OUT
REMOTE
E
H
F
G
I
Summary of Contents for AWRP605P - MULTI FUNCTION CONTROLLER
Page 45: ......
