Panasonic AW-UE150KP Operating Instructions Manual Download Page 52

Page: 52 / 174

DC. Level Depend. [–7 to +7]

The larger the setting for images down-converted from 4K to HD, the

more detail of bright parts is compressed.

This is enabled when [Format] is the following.

• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,

2160/25p

This is only enabled when [DownCon Detail] is set to [On].

DC. Knee Aperture Level [0 to 5]

Set the detail level of very bright parts in images down-converted from

4K to HD.

This is enabled when [Format] is the following.

• 2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,

2160/25p

This is only enabled when [DownCon Detail] is set to [On].

Return

Return to the previous menu level.

Picture 6/8 screen

Picture 6/8

Gamma Mode HD

Gamma 0.45

F-REC Dynamic Level 500%

F-REC Black STR. Level 0%

V-REC Knee Slope 150%

V-REC Knee Point 30%

Black Gamma 0

Black Gamma Range 1

DRS Off

Return

Gamma Mode

[HD, FILMLIKE1, FILMLIKE2, FILMLIKE3, FILM REC,

VIDEO REC, HLG]

Select the type of gamma curve.

HD (High Definition) video gamma characteristic.

FILMLIKE1

Characteristic capable of reproducing better gradation in

highlights than HD gamma.

FILMLIKE2

Characteristic capable of reproducing better gradation in

highlights than [FILMLIKE1].

FILMLIKE3

Characteristic capable of reproducing better gradation in

highlights than [FILMLIKE2].

FILM REC

Cinema film gamma characteristic.

VIDEO REC Cinema video gamma characteristic.
HLG

Hybrid Log Gamma characteristic.

This cannot be set when the [Color Setting] is [V-Log].

All of the following Gamma Mode items also cannot be set when

[Color Setting] is [V-Log].

<NOTE>

• When [Gamma Mode] is changed from [HLG] to a mode other

than [HLG], or when changed to [HLG], IP video transmission is

temporarily stopped.

Gamma [0.30 to 0.75]

Adjust the gamma correction level.

Specifying smaller values results in a gentler gamma curve for the

slope of low-brightness areas and sharper contrast.

Specifying larger values results in an expanded gradient for dark

areas and produces brighter images. The gamma curve for low-

brightness areas will be steeper, and contrast will be softer.

This is only enabled when [Gamma Mode] is set to other than [HLG].

F-REC Dynamic Level [200%, 300%, 400%, 500%, 600%]

Set the dynamic range.

This is only enabled when [Gamma Mode] is set to [FILM REC].

F-REC Black STR. Level [0% to 30%]

Set the black stretch.

This is only enabled when [Gamma Mode] is set to [FILM REC].

V-REC Knee Slope [150%, 200%, 250%, 300%, 350%, 400%, 450%,

500%]

Set the knee slope.

This is only enabled when [Gamma Mode] is set to [VIDEO REC].

V-REC Knee Point [30% to 107%]

Set the knee point.

This is only enabled when [Gamma Mode] is set to [VIDEO REC].

Camera menu items (continued)

Summary of Contents for AW-UE150KP















































































































































































Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands

Panasonic AW-UE150KP, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands