Panasonic AW-UE150KP Operating Instructions Manual Download Page 68

Page: 68 / 174

Output 7/9 screen

Output 7/9

OSD Off With R-Tally Off

OSD Status Off

Tally Enable

Tally LED Limit

R Unlimit

G Unlimit

Tally Brightness Low

Return

OSD Off With R‑Tally [Off, On]

Off or on the function that turns off camera menu, status, and other

displays when red tally signals are received via commands or

contacts.

When the red tally signal releases, the camera menu display will

return.

OSD Status [Off, On]

Turn the status display during AWB and ABB off/on, or error display

when an error occurs.

Tally

[Enable, Disable]

[Disable] or [Enable] is set here for the function which turns on or

turns off the tally lamp using the tally control signal.

Tally LED Limit

Sets whether to limit the lighting of the tally lamp for each of the tally

control signal colors (R/G).

R [Limit, Unlimit]

G [Limit, Unlimit]

Limit

Limit the lighting of the tally lamp.

Unlimit

Light the tally lamp.

<NOTE>

• If [Limit] is selected for [Tally LED Limit], only the tally lamp of this

unit is limited. The tally status display on external devices (the AW-

RP150, AW-RP60 controller, etc.) remains enabled.

Tally Brightness [Low, Mid, High]

Adjust the brightness of the tally LED.

Return

Return to the previous menu level.

Output 8/9 screen

Output 8/9

Status Lamp Enable

External Output

Output1 Off

Output2 Off

Return

Status Lamp

[Enable, Disable]

[Disable] or [Enable] is set here for the status display lamp.

When you want the status display lamp to stay off while this unit is in

operation, set to [Disable].

<NOTE>

• Even when set to [Disable], the status display lamp may light

up when this unit is starting up, updating firmware, or trouble is

occurring.

External Output

Select the signal type output from the External Output signal lines

(Output1, Output2) of the RS‑422 connector. (→ page 16)

Output1 [Off, R‑Tally, G‑Tally]

Output2 [Off, R‑Tally, G‑Tally]

Off

Signal is not output.

R-Tally

The reception status of the red tally signal is output.

G-Tally

The reception status of the green tally signal is output.

Return

Return to the previous menu level.

Camera menu items (continued)

Summary of Contents for AW-UE150KP















































































































































































Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands

Panasonic AW-UE150KP, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands