Panasonic AW-UE150KP Operating Instructions Manual Download Page 6

Page: 6 / 174

Read this first!

Note on grounding

• Ground the unit via the <SIGNAL GND> ground connector.

IR ID AUDIO IN

Ground connector

to ground

connector on wall

outlet, ground

bar, etc.

Trademarks and registered trademarks

• Microsoft

, Windows

7, Windows

10, Microsoft

Edge, Internet Explorer

, ActiveX

and DirectX

are either

registered trademarks or trademarks of Microsoft Corporation in

the United States and other countries.

• Apple, Mac, macOS, OS X, iPhone, iPad, and Safari are

registered trademarks of Apple Inc., in the United States and other

countries.

• Android™ and Chrome™ browser are trademarks of Google LLC.

• Intel

and Intel

Core™ are trademarks or registered trademarks

of Intel Corporation in the United States and other countries.

• Adobe

and Reader

are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United States

and/or other countries.

• The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States and other

countries.

• NDI

is a registered trademark of NewTek, Inc.

• Other names of companies and products contained in these

Operating Instructions may be trademarks or registered

trademarks of their respective owners.

About copyright and licence

Distributing, copying, disassembling, reverse compiling, reverse

engineering, and also exporting in violation of export laws of the

software provided with this unit are expressly prohibited.

Abbreviations

The following abbreviations are used in this manual.

• Microsoft

Windows

7 Professional SP1 32/64-bit is abbreviated

to “Windows 7”.

• Windows

Internet Explorer

11 32/64-bit is abbreviated to

“Internet Explorer”.

For the purposes of this manual, the model numbers of the units are

given as listed in the table below.

Model number of unit

Model number given in

manual

AW-UE150WP

AW‑UE150

AW-UE150KP

AW-UE150WE

AW-UE150KE

AW-RP150G

AW‑RP150

Illustrations and screen displays featured

in the manual

• What is shown in the manual’s illustrations and screen displays

may differ from how it is actually appears.

• Functions which can be used by Windows Internet Explorer 11

only are indicated using the

mark.

• The screenshots are used in accordance with the guidelines of

Microsoft Corporation.

Summary of Contents for AW-UE150KP















































































































































































Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands

Panasonic AW-UE150KP, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands