Panasonic AW-UE150KP Operating Instructions Manual Download Page 75

Page: 75 / 174

Firmware Version 2/2 screen

Firmware Version 2/2

EEPROM

Main/Network V01.00

Interface V01.00

FPGA

COM V01.00

AVIO V01.00

Return

EEPROM

Main/Network

Display the EEPROM version of the main/network.

Interface

Display the EEPROM version of the interface.

FPGA

COM

Display the FPGA version for communications.

AVIO

Display the FPGA version for image processing.

Return

Return to the previous menu level.

IP Network screen

IP Network

IP Address

192.168.0.10

Subnet Mask

255.255.255.0

Default Gateway

192.168.0.1

Set Execute

Return

IP Address

Set the IP address for this unit.

The set value is applied to this unit when [Set Execute] is executed.

Subnet Mask

Set the subnet mask for this unit.

The set value is applied to this unit when [Set Execute] is executed.

Default Gateway

Set the default gateway for this unit.

The set value is applied to this unit when [Set Execute] is executed.

Set Execute

Apply the values set in [IP Address], [Subnet Mask], and [Default

Gateway] to this unit.

Return

Return to the previous menu level.

<NOTE>

• The IP Network cannot be changed while the DHCP function is On.

• If the DHCP function is not to be used, change the setting for

[DHCP] to [Off] in the network settings screen of your web browser.

(→ page 132)

Camera menu items (continued)

Summary of Contents for AW-UE150KP















































































































































































Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands

Panasonic AW-UE150KP, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands