Panasonic AW-UE150KP Operating Instructions Manual Download Page 71

Page: 71 / 174

Pan/Tilt screen

Pan/Tilt

Install Position Desktop

Smart Picture Flip Off

Flip Detect Angle 90deg

P/T Speed Mode Normal(60deg/s)

Speed With Zoom Position On

Focus Adjust With PTZ. Off

Power On Position None

Preset Number 001

Return

Install Position

[Desktop, Hanging]

[Desktop] or [Hanging] is selected here as the method used to install

the unit.

Desktop Stand-alone installation
Hanging Suspended installation

<NOTE>

• When [Hanging] has been selected, the top, bottom, left and right

of the images will be reversed, and up/down/left/right control for

panning and tilting will also be reversed.

Smart Picture Flip [Off, Auto]

When the tilt becomes the angle set for [Flip Detect Angle], the image

will be flipped in the vertical direction automatically.

Off

The picture is not turned upside down.

Auto

The picture is automatically turned upside down.

Flip Detect Angle [60deg to 120deg ]

Set the tilt angle at which the image will be flipped in the vertical

direction automatically when [Smart Picture Flip] is set to [Auto].

P/T Speed Mode [Normal(60deg/s), Fast(180deg/s),

Quick(60deg/s)]

Set the speed of pan/tilt operation.

Normal

(60deg/s)

Pan/tilt operates at normal speed (maximum about 60° per

second).

Fast

(180deg/s)

Pan/tilt operates at fast speed (maximum about 180° per

second).

Quick

(60deg/s)

Pan/tilt operates at normal speed (maximum about 60° per

second) and acceleration and deceleration (rise time and

fall time) are faster.

<NOTE>

• The pan/tilt operation noise may increase when [Fast(180deg/s)] is

selected.

• Even when [Fast(180deg/s)] is selected, the pan/tilt speed during

preset playback will be the same speed as when [Normal(60deg/s)]

is selected.

Speed With Zoom Position [Off, On]

[Off] or [On] is set here for the function used to adjust the pan-tilt

adjustment speed in conjunction with the zoom magnification.

When [On] is set, the panning and tilting operations will become

slower in the zoom status.

This function has no effect during preset operations.

Focus Adjust With PTZ. [Off, On]

[Off] or [On] is set here for the function which compensates for out-of-

focusing when it occurs during panning, tilting or zooming operations.

When [Off] is set, adjust the focus as required after zooming or set

[Focus Mode] to [Auto].

This is only enabled when [Manual] has been selected as the [Focus

Mode] setting.

Power On Position [None, Standby, Home, Preset]

Select the initial positions for Pan/Tilt/Zoom when the power is turned

on.

None

Keep the positions of Pan/Tilt when the power was

last on, with Zoom being at the Wide end.

Standby

Move to the Pan/Tilt/Zoom positions they were in the

last time the camera was switched to Standby mode.

Home

Pan/Tilt move to their home positions (front) and

Zoom goes to the Wide end.

Preset

Preset playback is performed at the preset position

specified with [Preset Number].

Preset Number [001 to 100]

Specify a number for preset playback when the power turns ON when

[Preset] is set in [Power On Position].

<NOTE>

• If an unregistered preset number is set, preset playback is not

performed and the operation is the same as [None].

Return

Return to the previous menu level.

Camera menu items (continued)

Summary of Contents for AW-UE150KP















































































































































































Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands

Panasonic AW-UE150KP, Operating Instructions Manual

Search results

Summary of Contents for AW-UE150KP

Reviews:

Related manuals for AW-UE150KP

Brands by name

Popular brands