27
Configuring the unit operation settings
Enabling or disabling operation with the ENABLE buttons
The unit has five ENABLE buttons .
Each of the ENABLE buttons can be used to independently enable or disable the corresponding operation shown below .
USER ENABLE button
z
z
Operation of USER buttons
MEM ENABLE button
z
z
Operation of memory (preset memory and tracing memory)
Color adjustment ENABLE button
z
z
Operation of color adjustment section
PAN/TILT ENABLE button
z
z
Operation of PAN/TILT lever
FOCUS/ZOOM/IRIS ENABLE button
z
z
Operation of FOCUS dial, ZOOM button, and IRIS dial
1 .
Press the ENABLE button .
The button indicator lighting state changes .
Button indicator on or blinking:
Operation of the corresponding functions are enabled .
Button indicator off
:
Operation of the corresponding functions are disabled .
z
z
Menu operation is possible even when the MEM ENABLE button indicator is off .
z
z
The PAN/TILT ENABLE button indicator blinks while the PAN/TILT lever is being used to operate the switcher .
⇒
“Operating the switcher with the PAN/TILT lever and ZOOM button” (page 34)
z
z
The FOCUS/ZOOM/IRIS ENABLE button indicator blinks while the ZOOM button is being used to operate the switcher .
⇒
“Operating the switcher with the PAN/TILT lever and ZOOM button” (page 34)
z
z
When the operation of the ENABLE buttons is disabled by menu operation, operating the ENABLE buttons has no effect .
⇒
“Enabling or disabling operation of the ENABLE buttons by menu operation” (page 28)