Panasonic AW-RP120G, Operating Instructions Manual

Page: 57 / 60

57
Memory card
Indication Description
NO CARD! No card is inserted .
INITIALIZING . . .
NOT REMOVE CARD
Initializing .
SAVING . . .
NOT REMOVE CARD
Saving data to the memory card .
Do not remove the memory card .
LOADING . . .
NOT REMOVE CARD
Reading data from the memory card .
Do not remove the memory card .
COMPLETE Initializing, saving, or loading is
completed .
WRITE PROTECTED!
The memory card is write protected .
OVER 99FILES! Saving is not possible because
there are already 99 files .
INSUFFICIENT
CAPACITY!
Saving is not possible because
there is insufficient free space in the
memory card .
LOAD ERROR! A file cannot be read by the unit
or selected remote camera . The
following files are incompatible .
z z
A file saved with a different model
than the currently selected remote
camera .
z z
A file containing corrupted data
Setup software
Indication Description
Not connected . The unit and personal computer are
not connected .
Already assigned . The image input of the selected
switcher is already selected for
another camera number .
Take care not to make a duplicate
selection .
IP(### .### .### .###)
duplicate .
The entered connection destination
IP address (### .### .### .###) is a
duplicate of either the IP address of
the unit or a connection destination
IP address for another camera
number or the switcher .
Unavailable network
setting .
The entered IP address and port
number cannot be set .
Set correct values .
⇒ “Network settings of the unit” in
<Basics> (page 27)
⇒
“Settings for connecting with the
remote cameras and switcher” in
<Basics> (page 29)
Please reboot
AW‑RP120 .
The unit needs to be rebooted .
Turn the unit's power off and then
back on .
Old User Name or Old
Password is incorrect .
The entered user name or password
does not match the value set on
the unit .
Entered information is
incorrect . Enter again .
The entered information includes
characters that cannot be used on
the unit .
Complete the “Old User
Name” field .
Enter the user name in the “Old
User Name” box .
Complete the “New User
Name” field .
Enter the user name in the “New
User Name” box .
Complete the “Old
Password” field .
Enter the password in the “Old
Password” box .
Complete the “New
Password” field .
Enter the password in the “New
Password” box .
Complete the “Retype
New Password” field .
Enter the password in the “Retype
New Password” box .
Password entered in the
“Retype New Password”
field is incorrect .
The password entered in the
“Retype New Password” box does
not match the one entered in the
“New Password” box .
z z
A number is displayed instead of “#” .
Messages
(continued)