Panasonic AW-RP120G, Operating Instructions Manual

Page: 37 / 60

37
Initializing a memory card (INIT)
Before using a memory card with the unit, be sure to initialize the
memory card with the unit .
When the memory card is initialized, the memory card is formatted (in
compliance with SD standards) and dedicated directories are created .
z z
If you initialize a memory card, all of the files stored in the
memory card will be deleted .
Be sure to execute initialization after confirming the data because
any data that is deleted by the initialization cannot be recovered .
Note
1 .
Press the MENU button to turn on its indicator .
2 .
Open SD DELETE menu [48] .
DEL MODE :RPDAT
3 .
Turn the F1 dial to display the “INIT” item, and then
press the F1 dial to confirm the selection .
DEL MODE :INIT
EXEC
4 .
Press the F2 dial .
Initialization of the memory card begins .
z
When no memory card is inserted, “NO CARD!” appears .
INITIALIZING...
NOT REMOVE CARD
COMPLETE
z
When initialization completes, “COMPLETE” appears .
z
When initialization fails, “INITIAL ERROR!” appears . Replace the
memory card and then execute initialization again .
Saving data to a memory card (SAVE)
1 .
Press one of the camera selection buttons
[CAMERA SELECT/GROUP SELECT] to select a remote
camera .
2 .
Press the MENU button to turn on its indicator .
3 .
Open SD SAVE menu [46] .
SAVE MODE:RPDAT
4 .
Turn the F1 dial to select the type of data to save to the
memory card, and then press the F1 dial to confirm the
selection .
The file name assigned automatically in accordance with the
selected data type is displayed on the second line of the LCD panel .
SAVE MODE:RPMEM
RP10.m12
z
You can select a data type from RPDAT, RPMEM, CAM, and LOG .
However, when a remote camera connected via a serial
connection is selected, CAM and RPMEM cannot be selected .
z
The name of the file to be saved cannot be changed from the unit .
z
When no memory card is inserted, “NO CARD!” appears .
z
Up to 99 files of each of RPDAT, RPMEM, CAM, and LOG can be
saved to one memory card .
When 99 files already exist, “OVER 99FILES!” appears, and
saving is not possible .
Delete files and then execute saving again .
⇒ “Deleting the files saved to a memory card (DELETE)” (page 38)
5 .
Press the F2 dial to confirm the selection .
Saving to the memory card begins .
SAVING...
NOT REMOVE CARD
COMPLETE
z
When saving completes, “COMPLETE” appears .
z
When saving fails, “SAVE ERROR!” appears . Replace the memory
card and then execute saving again .
Memory card operations
(continued)