16
Operating preset memory groups (PMEM GROUP)
The unit allows you register up to four “preset memory groups” created
by selecting one preset memory for each of multiple remote cameras .
Pressing any of the PM GRP 1 to PM GRP 4 buttons simultaneously
recalls all preset memory registered to the corresponding preset
memory group .
The following setting procedures use the example of setting
PMEM GROUP1 but the setting procedures are the same for
PMEM GROUP2 to PMEM GROUP4 .
Open the following menus and configure the settings .
<Preset memory groups and menu numbers>
Preset memory group
Menu
PMEM GROUP1
PM GRP1 menu [31]
PMEM GROUP2
PM GRP2 menu [32]
PMEM GROUP3
PM GRP3 menu [33]
PMEM GROUP4
PM GRP4 menu [34]
Setting the operation mode (SEPARATE/
ALL)
1 .
Press the MENU button to turn on its indicator .
2 .
Open PM GRP1 menu [31] .
1.PM GRP1 MODE
SEPARATE
3 .
Turn the F1 dial to display the “1 . PM GRP1 MODE” item .
4 .
Turn the F2 dial to select the operation mode, and then
press the F2 dial to confirm the selection .
OFF
:
Disables group creation .
Even if you press any of the PM GRP1 to PM GRP4
buttons, a preset memory group will not be recalled .
SEPARATE :
Allows you to create a group by selecting a different
preset number from each remote camera .
Up to ten preset numbers can be registered to one
group .
ALL
:
Allows you to create a group by selecting the same
preset number from each remote camera .
One preset number for each of all the remote
cameras registered to the unit can be registered to
one group .
Creating preset memory groups
Registering the preset memory to recall when in
SEPARATE mode
1 .
Press the MENU button to turn on its indicator .
2 .
Open PM GRP1 menu [31] .
1.PM GRP1 MODE
SEPARATE
3 .
Turn the F1 dial to display the “2 . PM GRP1 1/10” item .
2.PM GRP1 1/10
NoAsgn ——————
4 .
Turn the F2 dial to set the camera number and preset
number to register to PMEM GROUP1 .
If you turn the F2 dial to select the camera number and then press
the F2 dial to confirm the selection, you will then be able to select
the preset number .
Set the preset number in the same way as the camera number .
2.PM GRP1 1/10
CAM001 PRE001
Camera number
Preset number
Camera number :
Select from NoAsgn and CAM001 to CAM100 .
When “NoAsgn” is set, preset memory is not
registered .
Preset number :
Select from PRE001 to PRE100 .
5 .
Turn the F1 dial to display the “3 . PM GRP1 2/10” to
“11 . PM GRP1 10/10” items .
6 .
Register the camera numbers and preset numbers .
z
Configure the settings in the same way as step
4
.
z
Up to ten preset memory can be registered to one group .
z
z
Do not set the same camera number two or more times for one
preset memory group .
Note
