47
Setup Software
(continued)
The screens of Windows XP are used in the explanations in this manual .
If you are using an operating system other than Windows XP, some of the items displayed on the screens may differ .
Registering the unit in Setup Software
On the “IP Address” tab, register the IP addresses of units to be set from Setup Software .
The units registered here can be selected from the list box on the “Setting” tab .
Up to five units can be registered .
1 .
Enter the IP addresses in the IP ADDRESS boxes .
In the RP1 to RP5 boxes, enter the IP addresses of the AW‑RP120
to register .
2 .
Click [Set] button .
3 .
In the list box on the “Setting” tab, select the AW‑RP120
whose data is to be referenced .
The settings configured on the selected unit are displayed on the
“Setting” tab .
