Panasonic AW-RP120G, Operating Instructions Manual

Page: 56 / 60

56
Messages
When starting up and switching camera groups
Indication Description
Don’t touch
PTZ Lever!
Do not operate the PAN/TILT lever
and the ZOOM button because they
are being initialized .
Connecting to
cameras
Connecting to the remote cameras
has started .
Operation lock
Indication Description
LOCKED! Operation is disabled .
z z
When an operation is performed
while the indicator of the ENABLE
button of the corresponding area
is off .
z z
When a number button with a
menu assigned is pressed while
menu operation is disabled .
IP connection settings
Indication Description
Unavailable
network setting
The entered IP address, subnet
mask, or port number cannot be set .
Enter a correct value .
⇒
“Network settings of the unit” in
<Basics> (page 27)
IP Duplicate! The entered IP address is a
duplicate of the IP address set
for another item (the connection
destination IP address for another
camera number or the switcher or
the IP address of the unit) .
Please reboot
AW‑RP120
The unit needs to be rebooted .
Turn the unit’s power off and then
back on .
When setting the connection types for remote cameras
Indication Description
Setting
CTRL TYPE
The connection types for remote
cameras are being changed .
Preset memory
Indication Description
CAM### PMEM
STORE COMPLETE
Preset memory registration has
completed .
CAM### PMEM
DELETE COMPLETE
Preset memory deletion has
completed .
Used by TMEM . Overwriting or deletion is not
possible because tracing memory is
registered to the selected number
button .
z z
A number is displayed instead of “#” .
Tracing memory
Indication Description
CAM##: TMEM
#m##s Remained .
# minutes ## seconds of recording
is still possible for the tracing
memory of CAM## .
TM##:
Standby Store
The recording standby state of
tracing memory .
TM##:
Waiting Opr .
The recording operation wait state of
tracing memory .
TM##: #m##s
Storing…
Recording tracing memory .
TM##: #m##s/#m##s
Standby Recall
The recall wait state of tracing
memory .
TM##: #m##s/#m##s
Recalling…
Recalling tracing memory .
TM##: #m##s/#m##s
Standby Restore
The restore standby state of tracing
memory .
TM##: #m##s/#m##s
Restoring…
Restoring tracing memory .
Please wait
FLASH Accessing .
Writing data to the flash memory in
the unit after recording or restoring
tracing memory .
CAM GRP can’t be
changed in TMEM
The camera group cannot be
switched in TMEM mode .
TMEM
DELETE COMPLETE
Tracing memory deletion has
completed .
z z
A number is displayed instead of “#” .