21
6 .
Press START button [11] .
The tracing memory is recalled and the remote camera starts
moving .
TM03:0m20s
/0m50s
Restoring...
Current recall position
Total time of tracing memory
during recalling
7 .
Operate one of the PAN/TILT lever, ZOOM button,
FOCUS dial, IRIS dial, and white balance mode selection
buttons to make a correction .
Overwriting is performed from the point in time that the correction
operation is performed .
z
z
It is not possible to correct just an arbitrary section of
recorded tracing memory data .
The registered data is deleted from the point in time that the
operation is performed so continue the operation until the
recording time ends to register the new data .
Note
8 .
When the recording time elapses, the remote camera
stops automatically .
The process returns to step
3
.
z
When STOP button [12] is pressed during recalling, recalling
stops .
The total time of the tracing memory changes, and the process
returns to step
3
.
Setting the items to recall when recalling
tracing memory
You can select whether to recall all or only some of the items registered
to tracing memory .
z
z
This function is enabled when AW‑HE50, AW‑HE60, or
AW‑HE120 is selected .
Note
1 .
Press the MEM SETTING button .
The current setting appears .
SPEED : ———
SCOPE : MODE A
z
If approximately 3 seconds elapses without an operation being
performed, the previous LCD panel display is redisplayed .
2 .
Turn the F2 dial to select a setting for the “SCOPE” item
from MODE A to MODE C, and then press the F2 dial to
confirm the selection .
The setting of the unit is changed .
This is applied the next time the tracing memory is recalled .
<SCOPE settings and recalled items>
Setting
Recalled item
Pan, tilt, zoom,
and focus
Iris
White balance
mode
MODE A
√
√
√
MODE B
√
√
—
MODE C
√
—
—
√: Recalled —: Not recalled
When the operation is performed, the PRESET SCOPE setting of
the remote camera is changed to the same setting as well at the
same time .
⇒
“Setting the operation items for when preset memory is recalled
(PRESET SCOPE)” (page 14)
Operating tracing memory (TMEM)
(continued)