7
Manually adjusting the white balance (R and B gain
settings)
1 .
As with the automatic adjustment, fill the screen with a
white subject .
2 .
Connect the video output of the currently selected
remote camera to a waveform monitor .
3 .
Press the WHITE BAL A button to turn on its indicator .
4 .
Turn the R GAIN dial to select the R channel (red)
setting, and turn the B GAIN dial to select the B channel
(blue) setting .
The adjustment results are registered to memory A .
z
The setting value is displayed during adjustment .
z
When the R GAIN dial and B GAIN dial are pressed, the setting
values do not change and are only displayed .
R GAIN :
+150
B GAIN :
+150
5 .
Press the WHITE BAL B button to turn on its indicator .
Perform step
4
in the same way as with the WHITE BAL A button to
set memory B .
Auto tracking white adjustment (ATW)
You can select the auto tracking white balance (ATW) mode for
automatically tracking the white balance in accordance with the lighting
conditions .
1 .
Press the ATW button to turn on its indicator .
ATW mode is enabled .
z
If there is no white on the screen, it may not be possible to
compensate the white balance properly .
Also, it may not be possible to compensate the white balance
properly depending on the lighting conditions .
Setting the black balance
The black balance needs to be adjusted when using a remote camera
for the first time or when a remote camera has not been used for a
prolonged period of time .
It also needs to be adjusted when significant changes have occurred in
the ambient temperature or at the change of the seasons .
When the camera will be used with the same settings and under the
same conditions, the black balance does not need to be adjusted again .
When the black balance is adjusted again, the previous memory data
will be erased and replaced with the new black balance settings .
Automatically adjusting the black balance
1 .
Press the ABB button .
The ABB button indicator blinks and the black balance is adjusted by
automatically closing the lens iris .
When adjustment ends successfully, the button indicator turns off
and the adjustment results are registered .
When adjustment was not possible, the ABB button indicator turns
on .
z
When the black balance is adjusted automatically, the R and
B PED setting values return to “±0” .
Manually adjusting the black balance
(R and B pedestal adjustment)
1 .
Connect the video output of the currently selected
remote camera to a waveform monitor .
2 .
Press the auto iris button to turn its indicator off .
3 .
Turn the IRIS dial to close the lens iris .
4 .
Turn the R PED dial to select the R channel (red) setting,
and turn the B PED dial to select the B channel (blue)
setting .
z
The setting value is displayed during adjustment .
z
When the R PED dial and B PED dial are pressed, the setting
values do not change and are only displayed .
R PED :
+150
B PED :
+150
Making image adjustments for the selected remote camera
(continued)
