Firmware version
CPU Software - Interface
Display the software version of the interface.
CPU Software - Camera Main
Display the software version of the camera unit.
CPU Software - Servo
Display the software version of the servo.
CPU Software - Network
Display the software version of the network.
EEPROM - Interface
Display the version of the setup data for the interface.
FPGA - Lens
Display the FPGA version of the lens.
FPGA - AVIO
Display the FPGA version of the AVIO.
FPGA - Com
Display the FPGA version of the communication.
Viewer software installation counter
The number of plug-in viewer software applications which have been
installed automatically from the unit is displayed by this counter.
Firmware file
Update the firmware.
For details on how to update, see “Updating the firmware” (→ page
@@).
Status
Display the current status of the unit.
z
Updating the firmware
Perform the following to update the firmware.
1.
After consulting with your dealer, download the latest
software to the hard disk of your personal computer.
<NOTE>
• No spaces or full-size characters can be used for the directory in
which the software will be stored.
• Keep the maximum combined number of characters to be used for
the name of the directory in which the software will be stored and for
the name of the software which has been downloaded to less than
250 characters.
2.
Click the Browse button, and specify the downloaded
software.
3.
Click the “Execute” button.
The software upgrade check screen is displayed.
After upgrading the software version, be absolutely sure to delete the
temporary Internet files.
<NOTE>
• Be absolutely sure to upgrade the software versions from the
personal computer in the same network (LAN) as the unit whose
firmware version is to be updated.
<NOTE>
• After the [Execute] button has been pressed, it will take about one
minute with the Camera Main software or about 3 minutes with the
Network software for the progress bar that indicates the progress
made in the version upgrading to appear.
• Use the personal computer on the same subnet as the camera to
upgrade the software version.
• Before using the version upgrading software, be absolutely sure to
check the precautions to be observed with your dealer, and follow the
dealer’s instructions.
• Use the following files specified by Panasonic Corporation as the
software used for version upgrading.
CPU Software Interface
.sif files
CPU Software Camera
Main
.scm files
CPU Software Servo
.spt files
CPU Software Network
.snw files
EEPROM Interface
.eep files
FPGA Lens
.fav files
FPGA AVIO
.fco files
FPGA Com
.fls files
• Do not turn off the unit’s power while upgrading a software version.
(Do not turn off the power until the progress bar display is cleared.)
• While a software version is being upgraded, do not attempt to execute
any other operations until the version has been upgraded.
102
Web screen configurations (continued)
103
Summary of Contents for AW-HE130W
Page 124: ...Index 124...
Page 125: ...125 MEMO...
