Panasonic AKW92112 User Manual Download

Page: 93 / 122

<3P3W>

Total

*The conversion value exceeds “99999999”,

“

－－－－－－－－

” is displayed.

Check and confirm the measurement environment.

6.2.23 Conversion value for integral export power

・

The conversion value for the present integral export active power (-P) is displayed.

(Only total conversion value is displayed for 3P3W.)

・

Press <SHIFT/

▽

> to change total, phase 1 (1

circuit), phase 2 (2

circuit) and phase 3 (3

circuit).

・

Press <SET> to change the display with each time-zone.

After changing, press <SET> to change displayed time-zone.

time-zone1(T1)

→

time-zone2(T2)

→

time-zone3(T3)

→

time-zone4(T4)

→

All time-zone

*Time-zone without setting for any time program is not displayed.

<1P2W/1P3W/3P4W>

All time-zone

Total Phase 1 (1

circuit) Phase 2 (2

circuit) Phase 3 (3

circuit)

time-zone1

time-zone2, time-zone3, time-zone4 and all time-zone are changed in turn.

<3P3W>

Total

*The conversion value exceeds “99999999”,

“

－－－－－－－－

” is displayed.

Check and confirm the measurement environment.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AKW92112



























































































































Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands

Panasonic AKW92112, User Manual

Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands