Panasonic AKW92112 User Manual Download

Page: 108 / 122

101

Ratio of estimated demand

・

Ratio of estimated demand is displayed.

Ex.) Estimated demand: 2.5kW, Power demand alarm threshold: 5.0kW

-> Ratio of estimated demand is 50.0%.

* [

－－－－－－－－

] is displayed during the following cases.

・

Until passing the setting time to start monitoring demand

・

Demand value exceeds the display range

・

Clock is changed between demand time span

・

Until starting next time span at power failure

・

[AL-PD] is not selected for unit for pulse output.

Integral power converted by pulse

・

Conversion value that pulse from outer pulse detector is converted to electric power is displayed.

Present value of current demand

・

Present value of current demand is displayed.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AKW92112



























































































































Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands

Panasonic AKW92112, User Manual

Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands