Panasonic AKW92112 User Manual Download

Page: 106 / 122

Present power demand

・

Each demand value is displayed.

・

Press <SHIFT/

▽

> to change active power, reactive power, apparent power.

・

Date and time when present demand is measured is displayed in lower 2 lines.

Active power Reactive power Apparent power

present demand present demand present demand

* [

－－－－－－－－

] is displayed during the following cases.

・

Until passing the setting time to start monitoring demand

・

Demand value exceeds the display range

・

Clock is changed between demand time span

・

Until starting next time span at power failure

Present export power demand

・

Each demand value is displayed.

・

Press <SHIFT/

▽

> to change active power (export), reactive power (export).

・

Date and time when present demand is measured is displayed in lower 2 lines.

Active power (export) Reactive power (export)

present demand present demand

* [

－－－－－－－－

] is displayed during the following cases.

・

Until passing the setting time to start monitoring demand

・

Demand value exceeds the display range

・

Clock is changed between demand time span

・

Until starting next time span at power failure

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AKW92112



























































































































Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands

Panasonic AKW92112, User Manual

Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands