54
4.4.6 Settings for time program
Time program 1 to 10
You can set 10-type time program.
Set start time and end time for each time-zone and use it with setting conversion rate.
Refer to 5.2 Time-zone setting function in detail.
*End time
Start time of PG-2 is set as the end time of PG-1.
It means that the end time of PG-n is the same as the start time of PG-(n+1).
Press <SET> and ‘time-zone’ is blinking. Press <ITEM/
△
>, <SHIFT/
▽
> to select the time-zone.
After that press <SET>, and ‘program start-time’ is blinking. Set hour and minute.
Same time period can’t be set to the different programs.
Press <ITEM/
△
> to change program number.
[Display explanation]
Program number; PG-1 to PG-10
time-zone; T1, T2, T3, T4, OFF
Program start time
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
