Panasonic AKW92112 User Manual Download

Page: 113 / 122

106

7) When it completes updating the firmware, the complete window will be appeared.

Click [OK].

8) Cell of unit that its firmware is updated correctly is blue.

You can confirm with the display of Eco-POWER METER and the display will return to measuring.

[When it doesn’t update correctly]

After completing download, cell of unit that updating is failure is red.

On the display of Eco-POWER METER, [PROG] is displayed on the upper line and [

‐

] is

displayed on the middle line.

Check and confirm the wiring of Eco-POWER METER and so on and update again.

9) Click [Exit] to close KW Version Upgrade Tool.

You can use Eco-POWER METER as it is.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for AKW92112



























































































































Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands

Panasonic AKW92112, User Manual

Search results

Summary of Contents for AKW92112

Reviews:

Related manuals for AKW92112

Brands by name

Popular brands