– 127 –
Chapter 6 Menu Operations — Menu list
Item
Description of settings
[ATW]
Sets the operations of the auto tracking white balance function.
[ON]:
Activates the auto tracking white balance function when in auto mode. The [ATW] function cannot be
enabled/disabled with the <WHITE BAL> switch or USER buttons. However, if [ATW LOCK] is assigned to
a USER button, the white balance value can be fixed with the USER button.
[OFF]:
Does not perform the operation of the [ATW] function when in auto mode. Performs the operation of
the white balance function selected with the <WHITE BAL> switch.
f
Factory setting: [ON]
[AF]
Sets the operation of the auto focus.
[ON]:
Performs the operation of auto focus when in auto mode. The <FOCUS> switch does not work.
[OFF]:
Does not perform the operation of auto focus when in auto mode. Activates the focus function
selected with the <FOCUS> switch.
f
Factory setting: [ON]
[RECORDING SETUP]
These are various types of setting items when performing camera recording and playback.
Set the system frequency, the number of lines, recording format, and recording method.
Item
Description of settings
[REC MEDIA]
Selects the slot for the media to be recorded.
[microP2]:
Uses microP2 memory cards (slots 1 and 2).
[P2]:
Uses P2 memory card (card slot 3).
f
Factory setting: [microP2]
[FILE SPLIT]
Selects whether to divide the recording file in 4 GB units or one file when recording in the microP2 memory
card (that exceeds 32 GB) in AVC-LongG format.
[ONE FILE]:
Records in one file.
[SPLIT]:
Splits the clip every 4 GB.
f
Factory setting: [ONE FILE]
[RECORDING]
Selects the recording format.
[NORMAL]:
Performs standard recording.
[INTERVAL]:
Performs interval recording.
[ONE SHOT]:
Performs one-shot recording.
[LOOP]:
Performs loop recording.
f
Factory setting: [NORMAL]
[RECORDING
SETTING]
[RECORDING HOLD]
Selects whether to hold [RECORDING] settings.
[ON]:
Holds the settings.
[OFF]:
Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on.
f
Factory setting: [OFF]
[ONE SHOT TIME]
Sets the recording duration of one-shot recording.
[1frm], [2frm], [4frm], [8frm], [16frm], [1s]
f
Factory setting: [1frm]
[INTERVAL TIME]
Sets the interval duration for interval recording.
[2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
f
Factory setting: [2frm]
[START DELAY]
Selects whether to delay the recording start time by approximately one second when performing interval
recording or one-short recording.
[ON], [OFF]
f
Factory setting: [OFF]
[PRE REC]
Selects whether to perform pre-recording. If [ON] is selected, pre-recording is performed for approximately
three seconds in HD, and for approximately seven seconds in SD.
[ON], [OFF]
f
Factory setting: [OFF]
[ONE CLIP REC]
Selects whether to perform one-clip recording.
[ON], [OFF]
f
Factory setting: [OFF]
[SIMUL REC]
Selects whether to perform simultaneous recording.
[ON], [OFF]
f
Factory setting: [OFF]
[DUAL CODEC
SETTING]
[REC MEDIA]
Selects media for recording proxy data.
[P2]:
Records proxy data to a P2 card.
[P2&SD]:
Records proxy data to both of a P2 card and SD memory card.
[OFF]:
Does not record proxy data.
f
Factory setting: [OFF]
[PROXY MODE]
Sets the recording mode of proxy data.
[LOW 2CH MOV], [HQ 2CH MOV], [SHQ 2CH MOV], [AVC-G6 2CH MOV]
f
Factory setting: [HQ 2CH MOV]
[PROXY DISP]
Selects whether to display proxy data recorded information or messages in the viewfinder and LCD
monitor.
[ON]:
Displays proxy recording information and SD memory card remaining capacity at the start of
recording. Warning information is displayed at all times.
[OFF]:
Displays proxy and SD memory card warning information for only three seconds when warning
occurs.
f
Factory setting: [OFF]
[START TEXT MEMO]
Selects whether to automatically add a text memo at recording start position each time recording is started.
[ON], [OFF]
f
Factory setting: [OFF]