Panasonic AJ-PX270EJ Operating Instructions Manual Download

Page: 173 / 190

– 173 –

Chapter 10 Maintenance and Inspection — Maintenance

Maintenance

Charging the built-in battery

The camera uses the built-in battery to remember the date and time.

appears on the viewfinder or LCD monitor, the built-in battery is running out. Charge the built-in battery by the following procedure.

Make sure that the power switch is <OFF>.

Connect the AC adaptor to the camera.

For details on the connection of AC adaptor, refer to “Using the AC adaptor” (page 26).

Leave the camera for approx. four hours.

The built-in battery will be charged.
After charging completes, set the date and time and check the time code.

is still displayed after charging, the built-in battery needs to be replaced. Consult your dealer.

Summary of Contents for AJ-PX270EJ































































































































































































Search results

Summary of Contents for AJ-PX270EJ

Reviews:

Related manuals for AJ-PX270EJ

Brands by name

Popular brands

Panasonic AJ-PX270EJ, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX270EJ

Reviews:

Related manuals for AJ-PX270EJ

Brands by name

Popular brands