Panasonic AJ-PX270EJ Operating Instructions Manual Download

Page: 179 / 190

– 179 –

Chapter 10 Maintenance and Inspection — Warning system

Network

Message

Description

Measure

[CANNOT CONNECT!]

A connection to the network cannot be established.

Check that the LAN settings are correct. Check that the

LAN cable is connected correctly and the network you

use is running.

[CANNOT FIND FTPSERVER!]

The connection destination FTP server cannot be found.

Check that the setting in the main menu

→

[NETWORK

SETUP]

→

[CLIENT SERVICE]

→

[FTP SERVER URL]

is correct.

[LOGIN FAILED!]

Logging in to the connection destination FTP server

failed.

Check that the settings in the main menu

→

[NETWORK SETUP]

→

[CLIENT SERVICE]

→

[LOGIN

USER] and [LOGIN PASSWORD] are correct.

[PING FAILED!]

The [PING] failed.

Check that the LAN setting and the setting in the main

→

[NETWORK SETUP]

→

[CLIENT SERVICE]

→

[FTP SERVER URL] are correct. Check that the LAN

cable is connected correctly and the network you use

is running.

[CANNOT ACCESS GATEWAY!]

The gateway server cannot be accessed.

Check that the LAN settings are correct.

[CHECK LAN SETTING]

The gateway server cannot be accessed.

Check that the LAN settings are correct.

[IP ADDRESS IS USED!]

The set IP address is being used by another device.

Consult your network administrator and set another IP

address.

[INVALID VALUE!]

The entered data value is invalid.

Enter data in a valid range.

Summary of Contents for AJ-PX270EJ































































































































































































Search results

Summary of Contents for AJ-PX270EJ

Reviews:

Related manuals for AJ-PX270EJ

Brands by name

Popular brands

Panasonic AJ-PX270EJ, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX270EJ

Reviews:

Related manuals for AJ-PX270EJ

Brands by name

Popular brands