background image

– 178 –

Chapter 10 Maintenance and Inspection — Warning system

Display

Description

Behavior and cause

[MISSING CLIP!]

Shot marks cannot be attached to the clips unless all 

clips recorded over multiple P2 cards are present.

Insert all P2 cards over which recording extended.

[NO CARD!]

No P2 or SD memory card is inserted.

Insert the relevant media.

[NO COPY TO SAME CARD!]

A clip cannot be copied to the card storing the original 

clip.

Copy the selected clip to a card that does not contain 

the original clip.

[NO FILE!]

The specified file does not exist.

Check the file.

[NO INPUT!]

No data is entered.

Enter data and then set.

[NO SD CARD!]

No SD memory card.

Insert an SD memory card.

[NOT SELECTED!]

Attempted to delete without selecting clips.

Select clips to delete.

[SAME CLIP IS SELECTED!]

Multiple instances of the same clip (copies) are included 

in the clips selected.

Multiple instances of the same clip (copies) cannot be 

copied simultaneously. Remove instances of the same 

clip from selected items.

[TOO MANY CLIPS!]

Too many clips are selected.

Reduce the number of selected clips.

[UNKNOWN CONTENTS FORMAT!]

This is a warning of the contents for the version that is 

not supported by the camera.

Match the device and content versions.

[UNKNOWN DATA!]

The metadata character code is invalid.

The metadata character code is UTF-8. Enter valid 

characters using a viewer.

There is a problem with data in the file.

Create the file again.

[USER CLIP NAME MODIFIED!]

When adding a counter value to the clip name, 

characters must be deleted.

For the counter addition setting, the user clip name plus 

the counter value can only contain up to 100 bytes. 

Characters in the clip name are automatically deleted 

when the total number of characters exceeds this limit.

[WRITE PROTECTED!]

The P2 card or SD memory card is write-protected.

Insert write-accessible media.

During soft keyboard operation

Display

Description

Behavior and cause

[AUTHENTICATION ERROR!]

Manual authentication failed.

Enter the correct password.

[CANNOT CHANGE!]

An attempt is made to enter the [PERSON] item (user 

who enters the memo) when there is no text memo.

Enter the [TEXT] (text information) first.

[CANNOT SET!]

[INVALID VALUE!]

The entered value is invalid.

Change the input value.

[CANNOT SET!]

[NO INPUT!]

There is not input to the software keyboard.

Enter the password.

[CANNOT SET!]

[RETRY PASSWORD IS DIFFERENT!]

The re-entered password is different.

Enter the correct reference password.

During USB host mode

Message

Description

Measure

[CANNOT ACCESS CARD!]

An error occurred while accessing the P2 card.

Check the P2 card.

[CANNOT ACCESS TARGET!]

An error occurred while accessing the connection target. Check the storage device status and connection.

[CANNOT COPY! FORMAT STORAGE 

DEVICE TO FAT]

The partition that can copy clips does not exist on the 

storage device.

Reformat in FAT format, or export the P2 card to create 

a partition.

[CANNOT FORMAT!]

The storage device cannot be formatted.

Change the connected storage device.

[CANNOT RECOGNIZE STORAGE 

DEVICE!]

The storage device is not correctly recognized.

Reboot the storage device or connect another storage 

device.

[CANNOT SELECT! MAX.6 PARTITIONS]

Storage devices with more than six partitions cannot be 

selected (mounted simultaneously).

Release selected partitions.

[CARD IS EMPTY! CANNOT COPY!]

The P2 card to copy is empty.

The copy operation is not performed because the card 

is empty.

[FORMAT P2 CARD!]

Cannot import to a P2 card containing clips.

Format the P2 card.

[LACK OF CAPACITY!]

Not enough space left on the storage device.

Use a new storage device with sufficient available space 

or a formatted storage device.

[MISMATCH COMPONENT!]

The P2 card model number of the copy source and copy 

destination do not match. Cannot copy.

Use the P2 cards of the same model number, or import 

on a clip basis.

[STORAGE DEVICE DISCONNECTED!]

The connection with the storage device is disconnected.

Reconnect the USB cable to the <USB3.0 HOST> 

terminal. When it does not function normally after that, 

turn off the power once and turn on the power again.

[TOO MANY PARTITIONS!]

There are too many partitions.

The maximum number of partitions on the storage 

device is 23. Either reformat, or use a new storage 

device.

[UNKNOWN DEVICE CONNECTED!]

A non-compatible DVD drive or other device is 

connected.

Change the connected device to the correct storage 

device, and then turn off the power once and turn on it 

again.

[VERIFICATION FAILED!]

The compare check performed after copying failed.

Copy it again.

Summary of Contents for AJ-PX270EJ































































































































































































Reviews: