Panasonic AJ-PX270EJ, Operating Instructions Manual, Page: 52 / 190

– 52 –
Chapter 4 Shooting — Adjusting the white and black balance
r
Messages displayed in the viewfinder and LCD monitor
Status Message Remark
During adjustment [ABB ACTIVE]
Adjustment completed [ABB OK]
f
The adjusted value is automatically stored in
memory.
@ @ NOTE
t
During black balance adjustment, the aperture is set to automatically shut out light.
t
During recording, black balance cannot be adjusted.
t
During the automatic black balance execution, recording to the P2 card is not performed by pressing the REC button.
t
The gain switching circuit is automatically switched during black balance adjustment. Flicker or noise sometimes appears on the viewfinder screen and
LCD monitor. This is not a malfunction.
Black balance memory
Values stored to memory are saved even if the camera is turned off.