– 137 –
Chapter 6 Menu Operations — Menu list
[CARD FUNCTIONS]
Configure the settings regarding reading/writing of the scene files and user files to SD memory cards.
Item
Description of settings
[SCENE FILE]
Loads scene files from an SD memory card or saves them to an SD memory card.
[LOAD]:
Loads scene files.
[SAVE]:
Saves scene files.
[USER FILE]
Loads user files from an SD memory card or saves them to an SD memory card.
[LOAD]:
Loads user files.
[SAVE]:
Saves user files.
[SD CARD PROPERTY]
Displays the SD memory card status. The format condition, available space, etc. can be checked.
[FORMAT SD CARD]
Formats an SD memory card.
[OTHER FUNCTIONS]
Configure these items to make settings for reading/writing, initialization of user file data on the internal memory, and the camera settings.
Item
Description of settings
[USER FILE]
Loads/saves/initializes user files on the camera memory.
[LOAD]:
Loads user files.
[SAVE]:
Saves user files.
[INITIALIZE]:
Restores user files to the factory settings.
[ACCESS LED]
Selects whether to light the access LED of the P2 card.
[ON], [OFF]
f
Factory setting: [ON]
[TALLY LAMP]
Sets up the tally lamp lighting conditions.
[FRONT]:
The front tally lamp lights up.
[REAR]:
The rear tally lamp lights up.
[BOTH]:
Both the front and rear tally lamps light up.
[OFF]:
The tally lamp does not light up.
f
Factory setting: [OFF]
[CLOCK SETTING]
Sets the built-in calendar (date and time) and time zone.
[TIME ZONE]
For GMT, set using 30 minute intervals from
−
12:00 to
+
13:00 (however,
+
12:45 is possible). After setting
the time, when changing the setting value for [TIME ZONE], the displayed and registered times switch to
the time with the time difference.
[GL PHASE]
When in HD (1080i, 720P) mode, selects the output signal of phase to be locked to the signal input to the
<GENLOCK IN/VIDEO OUT> terminal.
[HD SDI]:
Locks the HD SDI output signal to genlock input.
[COMPOSITE]:
Locks the down-converted composite output signals (signal from the <GENLOCK IN/
VIDEO OUT> terminal and signal of 480i, 576i from the <SDI OUT>terminal) to genlock input.
f
Factory setting: [HD SDI]
[H PHASE]
Adjusts the horizontal phase when the phase is to be locked to the signal input to the <GENLOCK IN/
VIDEO OUT> terminal.
[
−
512]…[512]
f
Factory setting: [0]
[SEEK POS SEL]
Selects the position to move when the <
)
>/<
%
> button is pressed while playback is paused.
[CLIP]:
Top of the clip
[CLIP&TEXT MEMO]:
Top of the clip and text memo location
f
Factory setting: [CLIP]
[GPS]
Configures internal GPS settings.
[ON]:
Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT> terminal
and records it as clip metadata.
[OFF]:
Does not activate the GPS operation. Does not output and record the location information.
f
Factory setting: [OFF]
[P.OFF GPS DATA]
Retains the GPS location information when the camera is turned off. Sets whether to record the retained
data at the next turning on until a positioning is performed.
[HOLD]:
Retains and records data.
[CLEAR]:
Clears the data at the time when the camera is turned off. Records 0 (No-Info) at the next
turning on until a positioning is performed.
f
Factory setting: [CLEAR]
[MENU INITIALIZE]
Restores the whole setting menu including all scene files (1 to 6) and user files to the factory settings.
[MAINTENANCE]
These are items for performing maintenance inspection of the camera. This menu is used for updating the firmware version of the camera.
Item
Description of settings
[UPDATE]
Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD
memory card.)
[ACTIVATE]
This menu activates optional functions (separate fees required).