– 14 –
Chapter 1 Overview — What you can do with this camera
Connecting to monitor
A monitor can be connected to output images.
Audio pin cable*
1
HDMI cable*
2
BNC cable (composite/HD SDI/SD SDI)*
3
Monitor
*1 Cables are optionally available. They are not supplied with the camera.
*2 Use an HDMI cable (optional) with double shielding. For the HDMI cable, using Panasonic HDMI cable is recommended.
*3 For the BNC cable (optional) connected to the <SDI OUT> terminal, prepare a double-shielded cable equivalent to 5C-FB.
Connecting to the network
Wired LAN connection
The following operations are available on your computer via LAN terminal:
f
Camera status check
f
Thumbnail image check
f
Proxy playback*
f
Download of proxy file/clip management information
f
Displaying/editing of metadata
f
Adding/deleting of metadata (shot mark or text memo)
f
Camera remote control (collective operations of recording control and time code/user bits)
In addition, clip transferring can be performed by the FTP client function via the LAN terminal.
* Contents which were recorded with AVC-LongG 6 cannot be played back.
Connecting using wireless LAN connection and 4G adaptor*
Attaching the wireless module AJ-WM30 (optional) to the <USB2.0 HOST> terminal (sub-host) of the camera allows you to connect the camera via
wireless LAN (IEEE 802.11).
The following operations are available using your tablet, smartphone, and computer.
f
Camera status check
f
Thumbnail image check
f
Proxy playback
f
Displaying/editing of metadata
f
Adding/deleting of metadata (shot mark or text memo)
f
Camera remote control (collective operations of recording control and time code/user bits)
In addition, clip transferring can be performed by the FTP client function via wireless LAN (access point connection) or 4G adaptor*.
* Schedule to support when future versions are upgraded
