23
Parts and their Functions
：
Warning and Status Display Functions
P
a
rt
s an
d th
ei
r F
unc
ti
ons
1.
Back tally lamp
When the 2.BACK TALLY switch is set to [ON], the
lamp behaves in the same way as the front tally lamp
at the viewfinder.
2.
BACK TALLY switch
This switch controls the action of the 1.back and 8.rear
tally lamps.
ON:
Back and rear tally lamps enabled.
OFF:
Back and rear tally lamps disabled.
3.
WARNING lamp
This lamp starts blinking or lights up if something
unusual occurs in the memory.
4.
USB lamp
Stays on when the camera-recorder is in USB mode.
5.
Access lamp
Blinks when the camera-recorder is in recording or
playback mode or when a P2 card is being accessed,
or stays on when a recordable P2 card is inserted.
6.
LIGHT button
Use this button to control illumination of the display
window.
Alternately pressing this button toggles illumination of
the 7.display window on or off.
7.
Display window
This window displays warnings, battery-remaining
level, sound volume, time data, and other information.
Note
When the battery is installed, the camera-recorder
indicates the data even if the power is turned off. To
turn off the data indications to keep the battery from
being discharged, specify OFF for the menu option P.
OFF LCD DISPLAY found in the TC/UB screen on the
MAIN OPERATION page.
8.
Rear tally lamp
When the 2.BACK TALLY switch is set on [ON], the
rear tally lamp behaves in the same way as the back
tally lamp.
Warning and Status Display Functions
1
2
6
3
4
5
8
7
#,*2:2836&'DQQMࡍࠫ㧞㧜㧜㧢ᐕ㧝㧞㧝㧞ᣣޓἫᦐᣣޓඦ೨㧥ᤨ㧡㧤ಽ
