143
Menu : Menu Description Tables
M
enu
The ____ in the Adjustable Range column indicates the
preset mode.
REC FUNCTION
Items/
Data Saved
Adjustable
Range
Remarks
PRE REC
MODE
ON
OFF
Select whether or not to enable PRE
RECORDING.
ON:
PRE RECORDING enabled.
OFF:
PRE RECORDING disabled.
Note
Specify the PRE RECORDING time by
using the menu option PRE REC TIME.
– C U F –
PRE REC
TIME
1SEC
:
8SEC
:
15SEC
Set PRE RECORDING.
1-15SEC:
Set the length of time that can be
retrospectively recorded before the
REC START button is pressed.
Note
When the SYSTEM MODE menu option
on the SYSTEM MODE screen is set to
1080-59.94i, 1080-50i, 720-59.94P, or
720-50P, or when it is set to 480-59.94i
or 576-50P and the REC MODE menu
option is set to DVCPRO50, the upper
limit of the above recording time is 8
seconds.
– C U F –
LOOP REC
MODE
ON
OFF
Select whether or not to enable LOOP
REC.
This setting can be used with PRE
RECORDING features.
ON:
Enable LOOP REC.
OFF:
Disable LOOP REC.
Note
After the power is turned off, this item
will default to OFF the next time the
power is turned on.
– – – F –
REC START
ALL
NORMAL
Select operating modes that allow
recording to start.
ALL:
Allow recording to start during
stop, recording pause, and
playback.
NORMAL:
Allow recording to start during stop
and recording pause.
– C U F –
P.ON REC
SLOT SEL
HOLD
SLOT1
Select the recording order of the slot
when the power is turned on.
HOLD:
The recording order starts with the
card previously selected when the
power was turned off.
SLOT1:
The recording order starts with the
card that is inserted in Slot 1 when the
power is turned on.
– C U F –
OUTPUT SEL
Items/
Data Saved
Adjustable
Range
Remarks
OUTPUT ITEM MENU ONLY
TC
STATUS
Set the character contents
superimposed onto the output signals
for the VIDEO OUT connector (Analog
or SDI) and MON OUT connector.
MENU ONLY:
Displays only when the menu
characters are superimposed. No
display appears when other characters
are superimposed.
TC:
Display the time code. (Displays the
menu when menu characters are
superimposed.)
Note
The TC display position moves up
and down depending on the camera
ID position.
STATUS:
Display the same characters
superimposed on the VF signal.
(Displays the menu when menu
characters are superimposed.)
– C U F –
MONITOR
OUT
VBS
VF
Y
Select the output signal on the MON OUT
connector.
VBS:
Output a regular composite signal.
VF:
Output a VF Y signal. The status
display is also superimposed.
Y:
Output a component Y signal.
– C U F –
MONITOR
OUT CHAR
ON
OFF
Select whether or not to superimpose
characters on the MON OUT connector
signal independently of the camera’s
VIDEO OUT CHARACTER switch. (The
character content is the same as the
video output signal.)
ON:
Enable superimpose.
OFF:
Disable superimpose.
– C U F –
LCD MON
CHAR
ON
OFF
Select whether or not to superimpose
characters on the LCD monitor. (The
character content is the same as the
video output signal.)
ON:
Enable superimpose.
(Not interlocked with the VIDEO
OUT CHARACTER switch.)
OFF:
Disable superimpose.
(Not interlocked with the VIDEO
OUT CHARACTER switch.)
– C U F –
VF MODE
MEM
CAM
When the REC SIGNAL menu option on
the SYSTEM MODE screen is set to
CAM, select the image to display in the
viewfinder.
MEM:
Display the playback image in the
playback mode.
CAM:
Always display the camera image.
– C U F –
THUMBNAIL
OUT
ON
OFF
Select whether or not to output clip
thumbnails displayed on the LCD
monitor to the video output and monitor
output signals.
ON:
Enable output.
OFF:
Disable output.
Note
HD SDI signals are being output from
the VIDEO OUT connector, thumbnails
are not output.
– C U F –
#,*2:2836&'DQQMࡍࠫ㧞㧜㧜㧢ᐕ㧝㧞㧝㧞ᣣޓἫᦐᣣޓඦ೨㧥ᤨ㧡㧤ಽ
