49
Adjustments and Settings for Recording : Setting Time Data
Adjus
tm
en
ts an
d Settin
gs f
o
r
Recor
ding
*1
It will not be slaved to a TC or UB value that is input in the SDI IN connector.
*2
Can be slaved to values input through the DVCPRO/DV connector but not to the TC for TC IN connector.
*3
If the option menu FRAME RATE UB is set to MENU, then recording is performed as per the UB or VITC UB mode. If
this is the case, however, edit tools (e.g. PC edit software) cannot record the required information.
*4
For free run, the time code is slaved to the time code input through the TC IN connector.
*5
For free run, the time code is slaved to the time code input through the TC IN connector if it is a non-drop frame.
*6
When the option UB MODE is set to EXT, then the bits are slaved to the user bits input through the TC IN connector.
*7
If the option UB MODE is set to EXT, then the bits are slaved to the user bits input through the DVCPRO/DV
connector.
The user bits (UB) to be recorded in the sub-code area are
selected through the menu option UB MODE. The user
bits (VITC UB) to be recorded in the VIDEO AUX area are
selected through the menu option VITC UB MODE.
USER (UB MODE only)
The included user value is recorded. A user value is
input through the display window. For more information
about how to input a user value, see[Inputting a user
value
] (page 50). The recorded user value is retained
even if the power is turned off.
TIME
The time kept by the built-in clock is recorded.
DATE
The hour digits for date and time kept by the built-in
clock are recorded.
EXT (UB MODE only)
The user bits value input through the TC IN connector
is recorded. When the menu option REC SIGNAL is
set to 1394, then the value is slaved to the user bits
value from the DVCPRO/DV connector. The included
user’s value will also be this input value.
TCG
The time code value is recorded.
FRM.RATE
The frame rate information for camera shooting is
recorded. For more information, see [Frame rate infor-
mation recorded in user bits
REGEN
The user bits last recorded on the current target P2
card is read and recorded as is.
USER/EXT
（
VITC UB MODE only
）
The included user’s value is recorded as the user bits
for the VIDEO AUX area. It is the same value as the
user bits indicated when the option UB MODE is set to
USER or EXT.
Recording time code and user bits
REC SIGNAL
SYSTEM MODE
CAMERA
MODE
TC in sub-code
area
TC in VIDEO
AUX area (VITC)
UB in sub-code
area
UB in VIDEO
AUX area (VITC
UB)
CAM
1080-59.94i
1080-50i
60I, 50i,
30P, 25P
As per the TC
mode*
4
As per the TC
mode*
4
As per the UB
mode*
6
As per the VITC
UB mode
24P, 24PA
Always non-drop
frame*
5
Always non-drop
frame*
5
Always frame rate
information*
3
720-59.94P
720-50P
60P, 50P,
30P, 25P
As per the TC
mode*
4
As per the TC
mode*
4
Always frame rate
information*
3
Always frame rate
information*
3
24P
Always non-drop
frame*
5
Always non-drop
frame*
5
480-59.94i
576-50i
60I, 50i,
30P, 25P
As per the TC
mode*
4
As per the TC
mode*
4
As per the UB
mode*
6
As per the VITC
UB mode
24P, 24PA
Always non-drop
frame*5
Always non-drop
frame
Always frame rate
information*
3
SDI or VIDEO*
1
1080-59.94i
1080-50i
L
As per the TC
mode*
4
As per the TC
mode*
4
As per the UB
mode*
6
As per the VITC
UB mode
720-59.94P
720-50P
L
Always frame rate
information*
3
Always frame rate
information*
3
480-59.94i
576-50i
L
As per the UB
mode*
6
As per the VITC
UB mode
1394
L
L
As per the TC
mode*
2
Regardless of the
setting, TC in the
VIDEO AUX area
input through the
DVCPRO/DV
connector is
recorded.
As per the UB
mode*
7
Regardless of the
setting, UB in the
VIDEO AUX area
input through the
DVCPRO/DV
connector is
recorded.
Setting of the user bits
#,*2:2836&'DQQMࡍࠫ㧞㧜㧜㧢ᐕ㧝㧞㧝㧞ᣣޓἫᦐᣣޓඦ೨㧥ᤨ㧡㧤ಽ
