Panasonic AJ-HPX2000P Operating Instructions Manual Download Page 104

Page: 104 / 178

104

Manipulating Clips with Thumbnails : Switching the Thumbnail Display

The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail
screen.

Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.

Press the THUMBNAIL MENU button. The thumbnail
menu appears.

Select THUMBNAIL from the thumbnail menu. Switch
the thumbnail display by selecting one of the following
items:

ALL CLIP:

Display all clips.

SAME FORMAT CLIPS:

Displays clips in the same format as the system
format.

SELECTED CLIPS:

Display randomly selected clips.

MARKED CLIPS:

Display clips with shot marks attached.

TEXT MEMO CLIPS:

Display clips with text memo data attached.

SLOT CLIPS:

Display clips recorded in the P2 card inserted in the
specified slot.
When this item is selected, SLOT1 to SLOT5 are
displayed as a sub-menu. Select the desired slot to
display the clips.

SETUP:

Please refer to [Setting the Thumbnail Display Mode]
(page 114) for information about this item.

EXIT:

Close the sub-menu.

Switching the Thumbnail Display

THUMBNAIL
MENU button

#,*2:2836&'DQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧝㧞᦬㧝㧞ᣣޓἫᦐᣣޓඦ೨㧥ᤨ㧡㧤ಽ

Summary of Contents for AJ-HPX2000P



















































































































































































Search results

Summary of Contents for AJ-HPX2000P

Reviews:

Related manuals for AJ-HPX2000P

Brands by name

Popular brands

Panasonic AJ-HPX2000P, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPX2000P

Reviews:

Related manuals for AJ-HPX2000P

Brands by name

Popular brands