Panasonic Aicure ANUP5255V2 Operation Manual Download Page 47

Page: 47 / 79

Aicure ANUP5255V2

UV irradiation

■

UV control

This function switches UV control between ON and OFF.
* This is valid when “UV control” is set at “Auto” in the “setting mode”. When “UV control” is set at
“Manual”, “Manual” is displayed.

Select “UV control” (the main screen) with the “

▲

” and “

▼

”

buttons

UV control    OFF
UV intensity    0800mW
Manual intensity control    40%

Back Next ON

▲

(Back)

Moves to the option immediately above the
current option.

▼

(Next)

Moves to the option immediately below the
current option.

SET (ON)/(OFF) Switches UV control between ON and OFF.

Press the “SET” button to switch “UV control” between ON and
OFF.

UV control    ON
UV intensity    0800mW
Manual intensity control    40%

Back Next OFF

Summary of Contents for Aicure ANUP5255V2
















































































Search results

Summary of Contents for Aicure ANUP5255V2

Reviews:

Related manuals for Aicure ANUP5255V2

Brands by name

Popular brands

Panasonic Aicure ANUP5255V2, Operation Manual

Search results

Summary of Contents for Aicure ANUP5255V2

Reviews:

Related manuals for Aicure ANUP5255V2

Brands by name

Popular brands