Panametrics PT878GC Instruction Manual Download Page 70

Page: 70 / 224

Chapter 4.

TransPort™ PT878GC User’s Manual

Repeat step 1 to enter the maximum percentage of peak.

The next prompt asks for the Percent of Peak, which is used to calculate the transit times and Delta-T.

Press

[ENTER]

to enter the text box.

Use the numeric keys to enter the desired value.

Press

[ENTER]

to confirm the entry.

To select (or deselect) Measure Times only (instead of both Skan and Measure times), press

[ENTER]

at the

Measure Only prompt.

Pressing the [



] key returns the meter to the Min Threshold entry, and pressing the [



] key returns the meter to the

Correlate tab.
•

To confirm the entries and return to Operate mode, press

[F3]

(OK).

•

To leave the window without confirming the entries and return to Operate mode, press

[F2]

(Cancel) or the

[ESC]

key.

Summary of Contents for PT878GC

































































































































































































































Search results

Summary of Contents for PT878GC

Reviews:

Related manuals for PT878GC

Brands by name

Popular brands

Panametrics PT878GC, Instruction Manual

Search results

Summary of Contents for PT878GC

Reviews:

Related manuals for PT878GC

Brands by name

Popular brands