Panametrics PT878GC, Instruction Manual

Page: 150 / 224

Chapter 9.
140 TransPort™ PT878GC User’s Manual
9.1.1 Entering the Service Menu
To enter the Service Menu, press the [MENU] key at the lower right of the PT878GC keypad. The Main Menu replaces
the Status Bar at the top of the screen. Press the [

] arrow key four times to scroll from the Site Menu to the Service
Menu. At the Service Menu, press [ENTER] . The screen appears similar to Figure 129 below. When programming, refer
to Figure A-10 on page A-10 of Appendix A, Menu Maps.
Figure 129: The Service Menu
To scroll to a particular option, press the [

] or [

] arrow keys until you reach the option. Then press [ENTER] to
open the option window.
When entering parameters in an option, press:
•
The [

] key to step through the available parameters.
• The [

] key to scroll back to a previously entered parameter.
• The [F2] key (Cancel) or the [ESC] key to exit an option at any time and return to Operate Mode without
changing the parameters.
9.1.2 Printing Reports
When used with an IR-compatible printer, the PT878GC can print out a variety of data (current site, logs, drive
contents, and user functions, tables, and settings) in the Reports option. To enter the Reports option, scroll to the
Reports entry on the Service Menu and press [ENTER] . The screen appears similar to Figure 130 below.
Velocity, ft/s Signal, dB
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Site Program Meter Logging Service
Units
Reports
Test
Calibrate
Diagnostics
Error Limits
Test

Factory Defaults
Flash Update
Signal Setup
T-Gauge Display
T-Gauge Setup