Panametrics PT878GC, Instruction Manual

Page: 141 / 224

TransPort™ PT878GC User’s Manual 131
Chapter 8.
The PT878GC returns to the Log Manager, which displays the highlighted log with a status of “Finished.” The space not
used by the finished log is freed for reuse.
Note: You cannot restart a finished log. You must create a new log with the same parameters.
8.1.4.4 Pausing All Logs
To pause all logs that are currently pending or running, open the Log menu, scroll to the Pause All Logs option, and
press [ENTER] . The PT878GC returns to the Log Manager, which displays all logs programmed to run now or in the
future with a status of “Paused.”
8.1.4.5 Restarting All Logs
To restart all paused logs, open the Log menu, scroll to the Start All Logs option, and press [ENTER] . The PT878GC
returns to the Log Manager, which displays the logs with a status of “Pending” or “Running.”
8.1.4.6 Ending All Logs
To end all currently pending or running logs, open the Log menu, scroll to the End All Logs option, and press
[ENTER] .The PT878GC returns to the Log Manager, which displays the running logs with a status of “Finished.”
8.1.4.7 View All Sites
To check on all logs, open the Log menu, scroll to the View All Sites option, and press [ENTER] . Logs are associated
with the site in use at the time the log is created. Thus, when another site is in use, the PT878GC automatically starts
different logs. By default, the Log Manager only displays the logs created with the current site. View All Sites allows the
Manager to list logs for all sites.