Panametrics PT878GC, Instruction Manual

Page: 72 / 224

Chapter 4.
62 TransPort™ PT878GC User’s Manual
b. Use the four arrow keys to scroll to the desired letter or symbol, and press [ENTER] to add the letter to the
label.
Note: Pressing [SEL] causes the screen to alternate between a set of upper-case (capital) letters, a set of
lower-case letters, and a set of symbols. Use all three screens to create a desired label.
c. Repeat this procedure for each letter or symbol you wish to add to the label. If you wish to delete a letter,
press [F1] (Delete) to erase each letter or symbol, from right to left on the label. (The label window can
display up to 14 characters.)
d. When you have completed the label, press [F3] (OK) to confirm the label, or [F2] (Cancel) to leave the
window without adding the label.
3. The next prompt asks for the Units Symbol.
a.
Press
[ENTER]
to reopen the text creation window.
b. Repeat the procedure used for the Label (on the previous page) to create the Units Symbol.
c. When you have completed the entry, press [F3] (OK) to confirm the symbol, or [F2] (Cancel) to leave the
window without adding the symbol. If you confirm the symbol, the Units symbol will appear to the right of the
zero and span text boxes.
4. The next prompt asks for the zero input value.
a.
Press
[ENTER]
to enter the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm the entry.
5. The final prompt asks for the span input value.
a.
Press
[ENTER]
to enter the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm the entry.
You have completed entering data for general-purpose inputs.