70
•
Only RTS motors can be controlled by RS485 RTS Transmitter or Dry Contact
Transmitter.
•
RS485 have a 5 dry contact input and Dry Contact Transmitter have only one
input.
•
Select the RTS address on the Channel selector corresponding to dry contact connectors.
•
The dry contact connector n
0
1 has per default, the RTS address n
0
1
•
The dry contact connector n
0
2 has per default, the RTS address n
0
2
•
The dry contact connector n
0
3 has per default, the RTS address n
0
3
•
The dry contact connector n
0
4 has per default, the RTS address n
0
4
•
The dry contact connector n
0
5 has per default, the RTS address n
0
5
•
Press the programming button on the back of the RTS control point or the RTS receiver
until the motor jogs.
The product is in programming mode.
•
Press the programming button on the RS485 RTS transmitter or Dry contact Transmitter
until the motor jogs.
The product is assigned to the transmitter.
•
It can up to 16 groups of Somfy RTS motors and receivers.
•
Press the programming button on the back of the RTS control point or the RTS receiver
until the motor jogs.
The product is in programming mode.
•
Send by the RS485 control or Dry Contact Transmitter, the corresponding RTS frame on
the desired channel.
The product is assigned to the transmitter’s channel with a motor jog.
•
It is impossible to set a motor or receiver with this RS485 RTS transmitter or Dry
Contact Transmitter.
Summary of Contents for SILVER PLUS
