61
6. SENSORS & AUTOMATION
6.1. Sensors
6.1.1. Single Motor Connection to EOLIS RTS (Wind Sensor)
6.1.1.1. Cabling
6.1.1.2. Programming
The motor must be in its learning mode to record an EOLIS RTS Sensor.
Up to three EOLIS RTS Sensors can be memorized in a motor and one EOLIS RTS Sensor can be
memorized in several motors.
•
Enter the “learning” mode;
•
Press more than 2 seconds on the programming button of a RTS control which
is already memorized in the motor.
•
Press briefly on the “prog” button of the EOLIS RTS Sensor.
•
The pergola moves shortly (DOWN/UP).
•
Record or delete a sensor;
•
Press briefly on the “prog” button of the EOLIS sensor RTS.
•
The pergola moves shortly (DOWN/UP).
Summary of Contents for SILVER PLUS
